Location: Beckley, WV
Est. Earnings (1yr)
$36,248
Est. from national median (299 programs)
Est. Median Debt
$7,913
Est. from national median (94 programs)

Analysis

A credential in precision metalworking from Academy of Careers and Technology comes with modest financial stakes—about $7,900 in estimated debt based on similar technical programs at the school—but the earnings picture requires some honest context. Since this program's outcomes aren't publicly reported due to small class sizes, we're relying on national data showing metalworking certificate holders typically earn around $36,000 in their first year. That produces a manageable debt-to-earnings ratio of 0.22, meaning graduates could theoretically pay off their loans in under three months of gross earnings.

The real question is whether this national benchmark reflects West Virginia's metalworking opportunities. With 11 programs statewide but none reporting actual earnings data, there's genuine uncertainty about what local employers pay entry-level metalworkers. National figures suggest steady, working-class income—not spectacular, but respectable for a short credential. For families concerned about debt, under $8,000 represents relatively low risk compared to many technical programs. The catch is that you're making this investment without clear evidence of how Academy of Careers and Technology's specific graduates fare in the local job market. If your child has a genuine interest in manufacturing and you've confirmed decent metalworking opportunities in your area, the debt burden is light enough to take a calculated risk.

Where Academy of Careers and Technology Stands

Earnings vs. debt across all precision metal working certificate's programs nationally

Academy of Careers and Technology (estimated ±10%)Other precision metal working programs

Dashed lines show national medians. Upper-left = best value.

Compare to Similar Programs Nationally

Precision Metal Working certificate's programs at top institutions nationally

Scroll to see more →

SchoolIn-State TuitionEarnings (1yr)*Earnings (4yr)Median Debt*Debt/Earnings
Academy of Careers and TechnologyBeckley—$36,248*—$7,913*—
Ferris State UniversityBig Rapids$13,630$68,852*$74,137$21,765*0.32
Idaho State UniversityPocatello$8,356$64,581*$55,405$9,000*0.14
Southcentral Kentucky Community and Technical CollegeBowling Green$4,656$58,996*—$9,413*0.16
Fox Valley Technical CollegeAppleton$4,916$53,507*$52,715$7,664*0.14
Elizabethtown Community and Technical CollegeElizabethtown$4,656$53,172*—$7,166*0.13
National Median—$36,248*—$9,000*0.25
* Estimated from similar programs

Career Paths

Occupations commonly associated with precision metal working graduates

Sheet Metal Workers

Fabricate, assemble, install, and repair sheet metal products and equipment, such as ducts, control boxes, drainpipes, and furnace casings. Work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; or inspecting, assembling, and smoothing seams and joints of burred surfaces. Includes sheet metal duct installers who install prefabricated sheet metal ducts used for heating, air conditioning, or other purposes.

$60,850/yrJobs growth:High school diploma or equivalent

Machinists

Set up and operate a variety of machine tools to produce precision parts and instruments out of metal. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures.

$57,700/yrJobs growth:

Tool and Die Makers

Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, jigs, fixtures, gauges, and machinists' hand tools.

$57,700/yrJobs growth:

Welders, Cutters, Solderers, and Brazers

Use hand-welding, flame-cutting, hand-soldering, or brazing equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

$51,000/yrJobs growth:High school diploma or equivalent

Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to extrude or draw thermoplastic or metal materials into tubes, rods, hoses, wire, bars, or structural shapes.

$46,800/yrJobs growth:

Forging Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend forging machines to taper, shape, or form metal or plastic parts.

$46,800/yrJobs growth:

Rolling Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to roll steel or plastic forming bends, beads, knurls, rolls, or plate, or to flatten, temper, or reduce gauge of material.

$46,800/yrJobs growth:

Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material.

$46,800/yrJobs growth:

Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend drilling machines to drill, bore, ream, mill, or countersink metal or plastic work pieces.

$46,800/yrJobs growth:

Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.

$46,800/yrJobs growth:

Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend lathe and turning machines to turn, bore, thread, form, or face metal or plastic materials, such as wire, rod, or bar stock.

$46,800/yrJobs growth:

Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend milling or planing machines to mill, plane, shape, groove, or profile metal or plastic work pieces.

$46,800/yrJobs growth:
About This Data

Source: U.S. Department of Education College Scorecard (October 2025 release)

Population: Graduates who received federal financial aid (Title IV grants or loans). At Academy of Careers and Technology, approximately 39% of students receive Pell grants. Students who did not receive federal aid are not included in these figures.

Earnings: Median earnings from IRS W-2 data for graduates who are employed and not enrolled in further education, measured 1 year after completion. Earnings are pre-tax and include wages, salaries, and self-employment income.

Debt: Median cumulative federal loan debt at graduation. Does not include private loans or Parent PLUS loans borrowed on behalf of students.

Estimated Earnings: Actual earnings data is not available for this program (typically due to privacy thresholds when fewer than 30 graduates reported earnings). The estimate shown is based on the national median of 299 similar programs. Actual outcomes may vary.