Precision Metal Working (Undergraduate Certificate or Diploma) at Bladen Community College

Est. Earnings (1yr)

$37,004

Est. from NC median (6 programs)

Est. Median Debt

$7,913

Est. from national median (94 programs)

Analysis

With estimated debt around $7,900 and first-year earnings near $37,000, Bladen's metal working certificate appears to hit the key markers of an affordable skilled trade credential. The debt-to-earnings ratio of 0.21 suggests graduates could reasonably pay off loans within months rather than years, assuming they secure typical jobs in the field. Similar programs across North Carolina cluster tightly around this earnings level, with top performers earning just $3,000 more annually—suggesting the field offers consistent but modest entry-level wages regardless of school choice.

The real advantage here is cost containment. While comparable programs in North Carolina carry median debt exceeding $10,500, Bladen's estimated borrowing runs about $2,700 lower. For a student body where two-thirds receive Pell grants, that difference matters. Whether this reflects efficient program design, effective financial aid, or shorter completion times, the lower debt load makes the economic equation more forgiving if graduates start on the lower end of the salary range.

The caveat: these figures come from peer programs since Bladen's graduate cohort is too small for the Department of Education to report specific outcomes. Your child's actual results will depend on local job availability in metalworking and their ability to complete the credential without excess borrowing. For families watching every dollar, this looks like a practical path to steady work without crushing debt, but confirm current job demand around Dublin before committing.

Where Bladen Community College Stands

Earnings vs. debt across all precision metal working certificate's programs nationally

Compare to Similar Programs in North Carolina

Precision Metal Working certificate's programs at peer institutions in North Carolina (59 total in state)

Scroll to see more →

School	In-State Tuition	Earnings (1yr)*	Earnings (4yr)	Median Debt*	Debt/Earnings
Bladen Community CollegeDublin	$2,558	$37,004*	—	$7,913*	—
Davidson-Davie Community CollegeThomasville	$1,978	$39,990*	—	$11,000*	0.28
NASCAR Technical InstituteMooresville	—	$37,568*	—	$10,593*	0.28
Asheville-Buncombe Technical Community CollegeAsheville	$2,882	$37,078*	—	—*	—
Guilford Technical Community CollegeJamestown	$2,319	$36,930*	$36,750	—*	—
Johnston Community CollegeSmithfield	$2,657	$34,171*	—	—*	—
National Median	—	$36,248*	—	$9,000*	0.25

* Estimated from similar programs

Career Paths

Occupations commonly associated with precision metal working graduates

Sheet Metal Workers

Fabricate, assemble, install, and repair sheet metal products and equipment, such as ducts, control boxes, drainpipes, and furnace casings. Work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; or inspecting, assembling, and smoothing seams and joints of burred surfaces. Includes sheet metal duct installers who install prefabricated sheet metal ducts used for heating, air conditioning, or other purposes.

$60,850/yrJobs growth:High school diploma or equivalent

Machinists

Set up and operate a variety of machine tools to produce precision parts and instruments out of metal. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures.

$57,700/yrJobs growth:

Tool and Die Makers

Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, jigs, fixtures, gauges, and machinists' hand tools.

$57,700/yrJobs growth:

Welders, Cutters, Solderers, and Brazers

Use hand-welding, flame-cutting, hand-soldering, or brazing equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

$51,000/yrJobs growth:High school diploma or equivalent

Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to extrude or draw thermoplastic or metal materials into tubes, rods, hoses, wire, bars, or structural shapes.

$46,800/yrJobs growth:

Forging Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend forging machines to taper, shape, or form metal or plastic parts.

$46,800/yrJobs growth:

Rolling Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to roll steel or plastic forming bends, beads, knurls, rolls, or plate, or to flatten, temper, or reduce gauge of material.

$46,800/yrJobs growth:

Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material.

$46,800/yrJobs growth:

Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend drilling machines to drill, bore, ream, mill, or countersink metal or plastic work pieces.

$46,800/yrJobs growth:

Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.

$46,800/yrJobs growth:

Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend lathe and turning machines to turn, bore, thread, form, or face metal or plastic materials, such as wire, rod, or bar stock.

$46,800/yrJobs growth:

Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend milling or planing machines to mill, plane, shape, groove, or profile metal or plastic work pieces.

$46,800/yrJobs growth:

About This Data

Source: U.S. Department of Education College Scorecard (October 2025 release)

Population: Graduates who received federal financial aid (Title IV grants or loans). At Bladen Community College, approximately 67% of students receive Pell grants. Students who did not receive federal aid are not included in these figures.

Earnings: Median earnings from IRS W-2 data for graduates who are employed and not enrolled in further education, measured 1 year after completion. Earnings are pre-tax and include wages, salaries, and self-employment income.

Debt: Median cumulative federal loan debt at graduation. Does not include private loans or Parent PLUS loans borrowed on behalf of students.

Estimated Earnings: Actual earnings data is not available for this program (typically due to privacy thresholds when fewer than 30 graduates reported earnings). The estimate shown is based on the median of 6 similar programs in NC. Actual outcomes may vary.