Location: Westampton, NJ
Est. Earnings (1yr)
$37,249
Est. from NJ median (4 programs)
Est. Median Debt
$7,913
Est. from national median (94 programs)

Analysis

In New Jersey, precision metal working programs typically lead to first-year earnings around $37,000—and based on similar programs, Burlington County Institute's certificate appears to track right at that state median. The estimated $7,900 in debt is notably lower than both the state median ($9,400) and national median ($9,000) for these programs, creating a debt-to-earnings ratio of 0.21 that suggests manageable repayment.

What's encouraging here is the program's positioning within the state's manufacturing training landscape. While one New Jersey competitor reports graduates earning nearly $40,000 in year one, several others cluster at this same $37,000 mark—meaning your student would be entering a consistent regional labor market for precision metalwork. The relatively low Pell grant participation (6%) may indicate that many students here are career changers or employed workers seeking additional credentials, though this makes it harder to gauge outcomes for traditional certificate-seekers.

The practical reality: if your child completes this program with debt near the estimate, they'd owe roughly $88 monthly under standard repayment—a manageable 3% of their gross monthly income. The combination of contained debt and earnings that match the state market makes this a defensible short-term credential, though comparing outcomes across New Jersey's ten precision metalworking programs could reveal better value elsewhere.

Where Burlington County Institute of Technology-Adult Education Stands

Earnings vs. debt across all precision metal working certificate's programs nationally

Burlington County Institute of Technology-Adult Education (estimated ±10%)Other precision metal working programs

Dashed lines show national medians. Upper-left = best value.

Compare to Similar Programs in New Jersey

Precision Metal Working certificate's programs at peer institutions in New Jersey (10 total in state)

Scroll to see more →

SchoolEarnings (1yr)*Earnings (4yr)Median Debt*Debt/Earnings
Burlington County Institute of Technology-Adult EducationWestampton$37,249*—$7,913*—
Universal Technical Institute-BloomfieldBloomfield$39,141*——*—
Lincoln Technical Institute-South PlainfieldSouth Plainfield$37,249*$42,279$9,429*0.25
Lincoln Technical Institute-MahwahMahwah$37,249*$42,279$9,429*0.25
Hohokus School of Trade and Technical SciencesPaterson$26,736*$47,845$7,600*0.28
National Median$36,248*—$9,000*0.25
* Estimated from similar programs

Career Paths

Occupations commonly associated with precision metal working graduates

Sheet Metal Workers

Fabricate, assemble, install, and repair sheet metal products and equipment, such as ducts, control boxes, drainpipes, and furnace casings. Work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; or inspecting, assembling, and smoothing seams and joints of burred surfaces. Includes sheet metal duct installers who install prefabricated sheet metal ducts used for heating, air conditioning, or other purposes.

$60,850/yrJobs growth:High school diploma or equivalent

Machinists

Set up and operate a variety of machine tools to produce precision parts and instruments out of metal. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures.

$57,700/yrJobs growth:

Tool and Die Makers

Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, jigs, fixtures, gauges, and machinists' hand tools.

$57,700/yrJobs growth:

Welders, Cutters, Solderers, and Brazers

Use hand-welding, flame-cutting, hand-soldering, or brazing equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

$51,000/yrJobs growth:High school diploma or equivalent

Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to extrude or draw thermoplastic or metal materials into tubes, rods, hoses, wire, bars, or structural shapes.

$46,800/yrJobs growth:

Forging Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend forging machines to taper, shape, or form metal or plastic parts.

$46,800/yrJobs growth:

Rolling Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to roll steel or plastic forming bends, beads, knurls, rolls, or plate, or to flatten, temper, or reduce gauge of material.

$46,800/yrJobs growth:

Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material.

$46,800/yrJobs growth:

Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend drilling machines to drill, bore, ream, mill, or countersink metal or plastic work pieces.

$46,800/yrJobs growth:

Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.

$46,800/yrJobs growth:

Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend lathe and turning machines to turn, bore, thread, form, or face metal or plastic materials, such as wire, rod, or bar stock.

$46,800/yrJobs growth:

Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend milling or planing machines to mill, plane, shape, groove, or profile metal or plastic work pieces.

$46,800/yrJobs growth:
About This Data

Source: U.S. Department of Education College Scorecard (October 2025 release)

Population: Graduates who received federal financial aid (Title IV grants or loans). At Burlington County Institute of Technology-Adult Education, approximately 6% of students receive Pell grants. Students who did not receive federal aid are not included in these figures.

Earnings: Median earnings from IRS W-2 data for graduates who are employed and not enrolled in further education, measured 1 year after completion. Earnings are pre-tax and include wages, salaries, and self-employment income.

Debt: Median cumulative federal loan debt at graduation. Does not include private loans or Parent PLUS loans borrowed on behalf of students.

Estimated Earnings: Actual earnings data is not available for this program (typically due to privacy thresholds when fewer than 30 graduates reported earnings). The estimate shown is based on the median of 4 similar programs in NJ. Actual outcomes may vary.