Precision Metal Working (Undergraduate Certificate or Diploma) at Catawba Valley Community College

Est. Earnings (1yr)

$37,004

Est. from NC median (6 programs)

Est. Median Debt

$7,913

Est. from national median (94 programs)

Analysis

A $7,913 certificate that leads to nearly $37,000 in first-year earnings—based on what similar precision metalworking programs across North Carolina produce—points to a practical vocational path. That debt-to-earnings ratio of 0.21 means graduates could theoretically clear their student loans in under three months of gross pay, which is about as manageable as technical training gets. With a third of students receiving Pell grants, this program appears designed for working-class families seeking direct job skills without the burden of crushing debt.

The estimated earnings align almost exactly with North Carolina's median for this field, and peer programs in the state show relatively consistent outcomes—the top programs earn $3,000-$4,000 more annually, but there's no dramatic spread. Nationally, precision metalworking certificates typically produce similar results, with the 75th percentile reaching only about $40,000. This is skilled trade work with stable but not spectacular pay prospects.

The catch here is that both the earnings and debt figures are estimates drawn from comparable programs, not actual tracked outcomes from Catawba Valley's graduates specifically. For a parent, that means you're betting on the program performing like its peers. Given the low estimated debt load and the field's consistency across North Carolina, it's a relatively safe bet for a student who wants hands-on manufacturing skills and immediate employment—just don't expect major earnings growth beyond the mid-30s in those early years.

Where Catawba Valley Community College Stands

Earnings vs. debt across all precision metal working certificate's programs nationally

Compare to Similar Programs in North Carolina

Precision Metal Working certificate's programs at peer institutions in North Carolina (59 total in state)

Scroll to see more →

School	In-State Tuition	Earnings (1yr)*	Earnings (4yr)	Median Debt*	Debt/Earnings
Catawba Valley Community CollegeHickory	$2,367	$37,004*	—	$7,913*	—
Davidson-Davie Community CollegeThomasville	$1,978	$39,990*	—	$11,000*	0.28
NASCAR Technical InstituteMooresville	—	$37,568*	—	$10,593*	0.28
Asheville-Buncombe Technical Community CollegeAsheville	$2,882	$37,078*	—	—*	—
Guilford Technical Community CollegeJamestown	$2,319	$36,930*	$36,750	—*	—
Johnston Community CollegeSmithfield	$2,657	$34,171*	—	—*	—
National Median	—	$36,248*	—	$9,000*	0.25

* Estimated from similar programs

Career Paths

Occupations commonly associated with precision metal working graduates

Sheet Metal Workers

Fabricate, assemble, install, and repair sheet metal products and equipment, such as ducts, control boxes, drainpipes, and furnace casings. Work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; or inspecting, assembling, and smoothing seams and joints of burred surfaces. Includes sheet metal duct installers who install prefabricated sheet metal ducts used for heating, air conditioning, or other purposes.

$60,850/yrJobs growth:High school diploma or equivalent

Machinists

Set up and operate a variety of machine tools to produce precision parts and instruments out of metal. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures.

$57,700/yrJobs growth:

Tool and Die Makers

Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, jigs, fixtures, gauges, and machinists' hand tools.

$57,700/yrJobs growth:

Welders, Cutters, Solderers, and Brazers

Use hand-welding, flame-cutting, hand-soldering, or brazing equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

$51,000/yrJobs growth:High school diploma or equivalent

Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to extrude or draw thermoplastic or metal materials into tubes, rods, hoses, wire, bars, or structural shapes.

$46,800/yrJobs growth:

Forging Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend forging machines to taper, shape, or form metal or plastic parts.

$46,800/yrJobs growth:

Rolling Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to roll steel or plastic forming bends, beads, knurls, rolls, or plate, or to flatten, temper, or reduce gauge of material.

$46,800/yrJobs growth:

Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material.

$46,800/yrJobs growth:

Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend drilling machines to drill, bore, ream, mill, or countersink metal or plastic work pieces.

$46,800/yrJobs growth:

Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.

$46,800/yrJobs growth:

Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend lathe and turning machines to turn, bore, thread, form, or face metal or plastic materials, such as wire, rod, or bar stock.

$46,800/yrJobs growth:

Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend milling or planing machines to mill, plane, shape, groove, or profile metal or plastic work pieces.

$46,800/yrJobs growth:

About This Data

Source: U.S. Department of Education College Scorecard (October 2025 release)

Population: Graduates who received federal financial aid (Title IV grants or loans). At Catawba Valley Community College, approximately 33% of students receive Pell grants. Students who did not receive federal aid are not included in these figures.

Earnings: Median earnings from IRS W-2 data for graduates who are employed and not enrolled in further education, measured 1 year after completion. Earnings are pre-tax and include wages, salaries, and self-employment income.

Debt: Median cumulative federal loan debt at graduation. Does not include private loans or Parent PLUS loans borrowed on behalf of students.

Estimated Earnings: Actual earnings data is not available for this program (typically due to privacy thresholds when fewer than 30 graduates reported earnings). The estimate shown is based on the median of 6 similar programs in NC. Actual outcomes may vary.