Location: Overland Park, KS•In-State Tuition: $2,328•Out-of-State Tuition: $5,472
Est. Earnings (1yr)
$41,504
Est. from national median (56 programs)
Est. Median Debt
$11,562
Est. from national median (20 programs)

Analysis

A debt load of roughly $11,500 to earn just over $41,000 in the first year translates to a manageable 0.28 debt-to-earnings ratio—well within the threshold where monthly payments shouldn't consume an unreasonable share of take-home pay. These figures come from comparable precision metalworking programs nationally, since Johnson County's cohort is too small for the Department of Education to publish. The national picture for this field is fairly consistent: most associate's degree programs cluster around $41,000 in first-year earnings with similar debt levels, suggesting these estimates provide a reasonable baseline for what to expect.

The practical reality is that metalworking trades offer steady, middle-income work without requiring a bachelor's degree. First-year earnings in the low forties typically grow with experience and specialized skills, and manufacturing demand in the Kansas City metro area provides local job opportunities. The relatively low debt burden means your child wouldn't be starting their career underwater financially, even if actual outcomes vary somewhat from these peer-program estimates.

Without school-specific data, you're betting on Johnson County's program performing roughly like the national median. Given the manageable debt and the field's stability, that's not an unreasonable wager—just understand you're working with educated guesswork rather than proven outcomes for this particular program.

Where Johnson County Community College Stands

Earnings vs. debt across all precision metal working associates's programs nationally

Johnson County Community College (estimated ±10%)Other precision metal working programs

Dashed lines show national medians. Upper-left = best value.

Compare to Similar Programs Nationally

Precision Metal Working associates's programs at top institutions nationally

Scroll to see more →

SchoolIn-State TuitionEarnings (1yr)*Earnings (4yr)Median Debt*Debt/Earnings
Johnson County Community CollegeOverland Park$2,328$41,504*—$11,562*—
Hennepin Technical CollegeBrooklyn Park$5,881$59,829*$73,136—*—
Ferris State UniversityBig Rapids$13,630$56,811*$77,380$17,500*0.31
Ivy Tech Community CollegeIndianapolis$4,912$56,292*$64,893$6,810*0.12
Dunwoody College of TechnologyMinneapolis$25,659$55,188*$61,261$12,000*0.22
Vincennes UniversityVincennes$6,886$54,908*$52,065$12,000*0.22
National Median—$41,504*—$12,000*0.29
* Estimated from similar programs

Career Paths

Occupations commonly associated with precision metal working graduates

Sheet Metal Workers

Fabricate, assemble, install, and repair sheet metal products and equipment, such as ducts, control boxes, drainpipes, and furnace casings. Work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; or inspecting, assembling, and smoothing seams and joints of burred surfaces. Includes sheet metal duct installers who install prefabricated sheet metal ducts used for heating, air conditioning, or other purposes.

$60,850/yrJobs growth:High school diploma or equivalent

Machinists

Set up and operate a variety of machine tools to produce precision parts and instruments out of metal. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures.

$57,700/yrJobs growth:

Tool and Die Makers

Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, jigs, fixtures, gauges, and machinists' hand tools.

$57,700/yrJobs growth:

Welders, Cutters, Solderers, and Brazers

Use hand-welding, flame-cutting, hand-soldering, or brazing equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

$51,000/yrJobs growth:High school diploma or equivalent

Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to extrude or draw thermoplastic or metal materials into tubes, rods, hoses, wire, bars, or structural shapes.

$46,800/yrJobs growth:

Forging Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend forging machines to taper, shape, or form metal or plastic parts.

$46,800/yrJobs growth:

Rolling Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to roll steel or plastic forming bends, beads, knurls, rolls, or plate, or to flatten, temper, or reduce gauge of material.

$46,800/yrJobs growth:

Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material.

$46,800/yrJobs growth:

Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend drilling machines to drill, bore, ream, mill, or countersink metal or plastic work pieces.

$46,800/yrJobs growth:

Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.

$46,800/yrJobs growth:

Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend lathe and turning machines to turn, bore, thread, form, or face metal or plastic materials, such as wire, rod, or bar stock.

$46,800/yrJobs growth:

Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend milling or planing machines to mill, plane, shape, groove, or profile metal or plastic work pieces.

$46,800/yrJobs growth:
About This Data

Source: U.S. Department of Education College Scorecard (October 2025 release)

Population: Graduates who received federal financial aid (Title IV grants or loans). At Johnson County Community College, approximately 16% of students receive Pell grants. Students who did not receive federal aid are not included in these figures.

Earnings: Median earnings from IRS W-2 data for graduates who are employed and not enrolled in further education, measured 1 year after completion. Earnings are pre-tax and include wages, salaries, and self-employment income.

Debt: Median cumulative federal loan debt at graduation. Does not include private loans or Parent PLUS loans borrowed on behalf of students.

Estimated Earnings: Actual earnings data is not available for this program (typically due to privacy thresholds when fewer than 30 graduates reported earnings). The estimate shown is based on the national median of 56 similar programs. Actual outcomes may vary.