Location: Spruce Pine, NC•In-State Tuition: $2,560•Out-of-State Tuition: $8,704
Est. Earnings (1yr)
$37,004
Est. from NC median (6 programs)
Est. Median Debt
$7,913
Est. from national median (94 programs)

Analysis

A debt load around $7,900 for a technical certificate represents one of the lighter financial commitments you'll find in vocational training. When peer programs across North Carolina's community college system suggest first-year earnings near $37,000, that creates a manageable debt-to-earnings ratio of about 0.21—meaning graduates typically earn nearly five dollars for every dollar borrowed.

The estimated earnings align closely with what similar metalworking programs produce statewide and nationally, placing graduates in solid manufacturing territory. North Carolina's precision metal sector offers consistent demand, particularly in the state's Piedmont manufacturing corridor, though Spruce Pine's more rural location may limit immediate local opportunities. Programs at schools like Davidson-Davie and NASCAR Tech—both reporting actual outcomes—show first-year earnings ranging from $35,000 to $40,000, suggesting the state benchmark reflects real market conditions.

The conservative debt estimate matters here. Even if actual costs run higher or earnings come in at the lower end of expectations, a sub-$10,000 investment in a skilled trade offers meaningful downside protection. For students comfortable with hands-on work and willing to relocate if needed, this represents a low-risk entry into manufacturing—though confirming Mayland's actual placement rates and employer partnerships would help validate whether this specific program connects graduates to those opportunities.

Where Mayland Community College Stands

Earnings vs. debt across all precision metal working certificate's programs nationally

Mayland Community College (estimated ±10%)Other precision metal working programs

Dashed lines show national medians. Upper-left = best value.

Compare to Similar Programs in North Carolina

Precision Metal Working certificate's programs at peer institutions in North Carolina (59 total in state)

Scroll to see more →

SchoolIn-State TuitionEarnings (1yr)*Earnings (4yr)Median Debt*Debt/Earnings
Mayland Community CollegeSpruce Pine$2,560$37,004*—$7,913*—
Davidson-Davie Community CollegeThomasville$1,978$39,990*—$11,000*0.28
NASCAR Technical InstituteMooresville—$37,568*—$10,593*0.28
Asheville-Buncombe Technical Community CollegeAsheville$2,882$37,078*——*—
Guilford Technical Community CollegeJamestown$2,319$36,930*$36,750—*—
Johnston Community CollegeSmithfield$2,657$34,171*——*—
National Median—$36,248*—$9,000*0.25
* Estimated from similar programs

Career Paths

Occupations commonly associated with precision metal working graduates

Sheet Metal Workers

Fabricate, assemble, install, and repair sheet metal products and equipment, such as ducts, control boxes, drainpipes, and furnace casings. Work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; or inspecting, assembling, and smoothing seams and joints of burred surfaces. Includes sheet metal duct installers who install prefabricated sheet metal ducts used for heating, air conditioning, or other purposes.

$60,850/yrJobs growth:High school diploma or equivalent

Machinists

Set up and operate a variety of machine tools to produce precision parts and instruments out of metal. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures.

$57,700/yrJobs growth:

Tool and Die Makers

Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, jigs, fixtures, gauges, and machinists' hand tools.

$57,700/yrJobs growth:

Welders, Cutters, Solderers, and Brazers

Use hand-welding, flame-cutting, hand-soldering, or brazing equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

$51,000/yrJobs growth:High school diploma or equivalent

Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to extrude or draw thermoplastic or metal materials into tubes, rods, hoses, wire, bars, or structural shapes.

$46,800/yrJobs growth:

Forging Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend forging machines to taper, shape, or form metal or plastic parts.

$46,800/yrJobs growth:

Rolling Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to roll steel or plastic forming bends, beads, knurls, rolls, or plate, or to flatten, temper, or reduce gauge of material.

$46,800/yrJobs growth:

Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material.

$46,800/yrJobs growth:

Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend drilling machines to drill, bore, ream, mill, or countersink metal or plastic work pieces.

$46,800/yrJobs growth:

Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.

$46,800/yrJobs growth:

Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend lathe and turning machines to turn, bore, thread, form, or face metal or plastic materials, such as wire, rod, or bar stock.

$46,800/yrJobs growth:

Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend milling or planing machines to mill, plane, shape, groove, or profile metal or plastic work pieces.

$46,800/yrJobs growth:
About This Data

Source: U.S. Department of Education College Scorecard (October 2025 release)

Population: Graduates who received federal financial aid (Title IV grants or loans). At Mayland Community College, approximately 26% of students receive Pell grants. Students who did not receive federal aid are not included in these figures.

Earnings: Median earnings from IRS W-2 data for graduates who are employed and not enrolled in further education, measured 1 year after completion. Earnings are pre-tax and include wages, salaries, and self-employment income.

Debt: Median cumulative federal loan debt at graduation. Does not include private loans or Parent PLUS loans borrowed on behalf of students.

Estimated Earnings: Actual earnings data is not available for this program (typically due to privacy thresholds when fewer than 30 graduates reported earnings). The estimate shown is based on the median of 6 similar programs in NC. Actual outcomes may vary.