Location: Marion, NC•In-State Tuition: $1,958•Out-of-State Tuition: $6,566
Est. Earnings (1yr)
$37,004
Est. from NC median (6 programs)
Est. Median Debt
$7,913
Est. from national median (94 programs)

Analysis

Based on comparable programs in North Carolina, this certificate suggests a manageable path into manufacturing work with estimated first-year earnings around $37,000 against roughly $7,900 in debt. That's a debt-to-earnings ratio of 0.21—meaning graduates could theoretically pay off their loans with about two and a half months of gross income, which positions this as a relatively low-risk credential.

The earnings estimate aligns with the state median for precision metalworking programs, placing McDowell Tech in the middle of the pack among North Carolina's 59 similar offerings. Nearby Davidson-Davie reports actual outcomes about $3,000 higher, while NASCAR Tech's specialized training commands a premium. What works in McDowell Tech's favor is the significantly lower estimated debt compared to the state's $10,600 median—keeping total borrowing under $8,000 matters when you're entering a field where wages typically start in the mid-to-upper $30,000s.

The real uncertainty here is whether these statewide patterns hold true for McDowell Tech specifically, given that the school's actual outcomes weren't reportable. For a short-term certificate in a hands-on trade, the estimated numbers suggest reasonable value, but your child should visit the program, talk to instructors about job placement rates in the local Marion area, and confirm that manufacturing employers in the region actively hire from this program before committing.

Where McDowell Technical Community College Stands

Earnings vs. debt across all precision metal working certificate's programs nationally

McDowell Technical Community College (estimated ±10%)Other precision metal working programs

Dashed lines show national medians. Upper-left = best value.

Compare to Similar Programs in North Carolina

Precision Metal Working certificate's programs at peer institutions in North Carolina (59 total in state)

Scroll to see more →

SchoolIn-State TuitionEarnings (1yr)*Earnings (4yr)Median Debt*Debt/Earnings
McDowell Technical Community CollegeMarion$1,958$37,004*—$7,913*—
Davidson-Davie Community CollegeThomasville$1,978$39,990*—$11,000*0.28
NASCAR Technical InstituteMooresville—$37,568*—$10,593*0.28
Asheville-Buncombe Technical Community CollegeAsheville$2,882$37,078*——*—
Guilford Technical Community CollegeJamestown$2,319$36,930*$36,750—*—
Johnston Community CollegeSmithfield$2,657$34,171*——*—
National Median—$36,248*—$9,000*0.25
* Estimated from similar programs

Career Paths

Occupations commonly associated with precision metal working graduates

Sheet Metal Workers

Fabricate, assemble, install, and repair sheet metal products and equipment, such as ducts, control boxes, drainpipes, and furnace casings. Work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; or inspecting, assembling, and smoothing seams and joints of burred surfaces. Includes sheet metal duct installers who install prefabricated sheet metal ducts used for heating, air conditioning, or other purposes.

$60,850/yrJobs growth:High school diploma or equivalent

Machinists

Set up and operate a variety of machine tools to produce precision parts and instruments out of metal. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures.

$57,700/yrJobs growth:

Tool and Die Makers

Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, jigs, fixtures, gauges, and machinists' hand tools.

$57,700/yrJobs growth:

Welders, Cutters, Solderers, and Brazers

Use hand-welding, flame-cutting, hand-soldering, or brazing equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

$51,000/yrJobs growth:High school diploma or equivalent

Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to extrude or draw thermoplastic or metal materials into tubes, rods, hoses, wire, bars, or structural shapes.

$46,800/yrJobs growth:

Forging Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend forging machines to taper, shape, or form metal or plastic parts.

$46,800/yrJobs growth:

Rolling Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to roll steel or plastic forming bends, beads, knurls, rolls, or plate, or to flatten, temper, or reduce gauge of material.

$46,800/yrJobs growth:

Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material.

$46,800/yrJobs growth:

Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend drilling machines to drill, bore, ream, mill, or countersink metal or plastic work pieces.

$46,800/yrJobs growth:

Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.

$46,800/yrJobs growth:

Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend lathe and turning machines to turn, bore, thread, form, or face metal or plastic materials, such as wire, rod, or bar stock.

$46,800/yrJobs growth:

Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend milling or planing machines to mill, plane, shape, groove, or profile metal or plastic work pieces.

$46,800/yrJobs growth:
About This Data

Source: U.S. Department of Education College Scorecard (October 2025 release)

Population: Graduates who received federal financial aid (Title IV grants or loans). At McDowell Technical Community College, approximately 37% of students receive Pell grants. Students who did not receive federal aid are not included in these figures.

Earnings: Median earnings from IRS W-2 data for graduates who are employed and not enrolled in further education, measured 1 year after completion. Earnings are pre-tax and include wages, salaries, and self-employment income.

Debt: Median cumulative federal loan debt at graduation. Does not include private loans or Parent PLUS loans borrowed on behalf of students.

Estimated Earnings: Actual earnings data is not available for this program (typically due to privacy thresholds when fewer than 30 graduates reported earnings). The estimate shown is based on the median of 6 similar programs in NC. Actual outcomes may vary.