Precision Metal Working (Associate's Degree) at Monroe County Community College

Est. Earnings (1yr)

$41,504

Est. from national median (56 programs)

Est. Median Debt

$11,562

Est. from national median (20 programs)

Analysis

Michigan's precision metal working programs typically deliver strong results—similar programs in the state report median earnings of $53,450, well above the national benchmark. Monroe County's program estimates suggest first-year earnings around $41,504, notably lower than other Michigan schools like Ferris State ($56,811) or Grand Rapids Community College ($50,089). Without actual graduate outcome data for Monroe County, it's difficult to know whether this gap reflects the program's performance or simply the limitations of national estimation methods.

The estimated debt load of $11,562 is manageable regardless—translating to a 0.28 debt-to-earnings ratio that should allow for comfortable loan repayment even at the lower earnings estimate. Peer programs in Michigan report slightly higher typical debt ($17,500), so Monroe County may offer cost advantages that help offset any earnings differential. For a skilled trade where hands-on training and local employer connections matter significantly, the uncertainty around these estimates is particularly important to recognize.

The practical question is whether Monroe County's specific program connects students to Michigan's higher-paying metalworking jobs or whether graduates face a steeper climb to reach those earnings levels. Tour the facilities, talk to instructors about placement rates with local manufacturers, and ask where recent graduates landed jobs. The debt picture looks reasonable, but you'll want actual graduate outcomes—not estimated benchmarks—to judge whether this program delivers the earning power typical of Michigan's metalworking training.

Where Monroe County Community College Stands

Earnings vs. debt across all precision metal working associates's programs nationally

Compare to Similar Programs in Michigan

Precision Metal Working associates's programs at peer institutions in Michigan (23 total in state)

Scroll to see more →

School	In-State Tuition	Earnings (1yr)*	Earnings (4yr)	Median Debt*	Debt/Earnings
Monroe County Community CollegeMonroe	$4,566	$41,504*	—	$11,562*	—
Ferris State UniversityBig Rapids	$13,630	$56,811*	$77,380	$17,500*	0.31
Grand Rapids Community CollegeGrand Rapids	$4,059	$50,089*	—	—*	—
National Median	—	$41,504*	—	$12,000*	0.29

* Estimated from similar programs

Career Paths

Occupations commonly associated with precision metal working graduates

Sheet Metal Workers

Fabricate, assemble, install, and repair sheet metal products and equipment, such as ducts, control boxes, drainpipes, and furnace casings. Work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; or inspecting, assembling, and smoothing seams and joints of burred surfaces. Includes sheet metal duct installers who install prefabricated sheet metal ducts used for heating, air conditioning, or other purposes.

$60,850/yrJobs growth:High school diploma or equivalent

Machinists

Set up and operate a variety of machine tools to produce precision parts and instruments out of metal. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures.

$57,700/yrJobs growth:

Tool and Die Makers

Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, jigs, fixtures, gauges, and machinists' hand tools.

$57,700/yrJobs growth:

Welders, Cutters, Solderers, and Brazers

Use hand-welding, flame-cutting, hand-soldering, or brazing equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

$51,000/yrJobs growth:High school diploma or equivalent

Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to extrude or draw thermoplastic or metal materials into tubes, rods, hoses, wire, bars, or structural shapes.

$46,800/yrJobs growth:

Forging Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend forging machines to taper, shape, or form metal or plastic parts.

$46,800/yrJobs growth:

Rolling Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to roll steel or plastic forming bends, beads, knurls, rolls, or plate, or to flatten, temper, or reduce gauge of material.

$46,800/yrJobs growth:

Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material.

$46,800/yrJobs growth:

Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend drilling machines to drill, bore, ream, mill, or countersink metal or plastic work pieces.

$46,800/yrJobs growth:

Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.

$46,800/yrJobs growth:

Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend lathe and turning machines to turn, bore, thread, form, or face metal or plastic materials, such as wire, rod, or bar stock.

$46,800/yrJobs growth:

Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend milling or planing machines to mill, plane, shape, groove, or profile metal or plastic work pieces.

$46,800/yrJobs growth:

About This Data

Source: U.S. Department of Education College Scorecard (October 2025 release)

Population: Graduates who received federal financial aid (Title IV grants or loans). At Monroe County Community College, approximately 25% of students receive Pell grants. Students who did not receive federal aid are not included in these figures.

Earnings: Median earnings from IRS W-2 data for graduates who are employed and not enrolled in further education, measured 1 year after completion. Earnings are pre-tax and include wages, salaries, and self-employment income.

Debt: Median cumulative federal loan debt at graduation. Does not include private loans or Parent PLUS loans borrowed on behalf of students.

Estimated Earnings: Actual earnings data is not available for this program (typically due to privacy thresholds when fewer than 30 graduates reported earnings). The estimate shown is based on the national median of 56 similar programs. Actual outcomes may vary.