Location: Crownpoint, NM•In-State Tuition: $4,250
Est. Earnings (1yr)
$36,248
Est. from national median (299 programs)
Est. Median Debt
$7,913
Est. from national median (94 programs)

Analysis

Based on similar precision metal working programs nationwide, Navajo Technical University's certificate appears positioned to deliver solid technical training at a manageable cost. The estimated $7,913 in debt sits below the national median of $9,000 for these programs, while peer programs typically produce first-year earnings around $36,248—creating a debt-to-earnings ratio of 0.22 that suggests graduates could realistically pay off loans within a year or two of full-time work.

The challenge for New Mexico families is context: with 21 schools offering precision metal working in the state but none reporting actual graduate outcomes, it's difficult to gauge how this program stacks up locally or what the regional job market truly supports. The half of NTU students receiving Pell grants suggests the school serves many families for whom even modest debt carries weight, making the relatively low borrowing estimate a practical consideration. Nationally, the field shows consistency—75th percentile earners make about $40,000, not dramatically higher than the median—indicating this is a stable trade rather than one with wide income variation.

For families considering this program, the estimated numbers suggest reasonable value, but the lack of school-specific data means you're making this decision somewhat blind. Talk directly with the program about job placement rates and local employer connections—those specifics matter more than national averages when you're training for hands-on work in a particular region.

Where Navajo Technical University Stands

Earnings vs. debt across all precision metal working certificate's programs nationally

Navajo Technical University (estimated ±10%)Other precision metal working programs

Dashed lines show national medians. Upper-left = best value.

Compare to Similar Programs Nationally

Precision Metal Working certificate's programs at top institutions nationally

Scroll to see more →

SchoolIn-State TuitionEarnings (1yr)*Earnings (4yr)Median Debt*Debt/Earnings
Navajo Technical UniversityCrownpoint$4,250$36,248*—$7,913*—
Ferris State UniversityBig Rapids$13,630$68,852*$74,137$21,765*0.32
Idaho State UniversityPocatello$8,356$64,581*$55,405$9,000*0.14
Southcentral Kentucky Community and Technical CollegeBowling Green$4,656$58,996*—$9,413*0.16
Fox Valley Technical CollegeAppleton$4,916$53,507*$52,715$7,664*0.14
Elizabethtown Community and Technical CollegeElizabethtown$4,656$53,172*—$7,166*0.13
National Median—$36,248*—$9,000*0.25
* Estimated from similar programs

Career Paths

Occupations commonly associated with precision metal working graduates

Sheet Metal Workers

Fabricate, assemble, install, and repair sheet metal products and equipment, such as ducts, control boxes, drainpipes, and furnace casings. Work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; or inspecting, assembling, and smoothing seams and joints of burred surfaces. Includes sheet metal duct installers who install prefabricated sheet metal ducts used for heating, air conditioning, or other purposes.

$60,850/yrJobs growth:High school diploma or equivalent

Machinists

Set up and operate a variety of machine tools to produce precision parts and instruments out of metal. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures.

$57,700/yrJobs growth:

Tool and Die Makers

Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, jigs, fixtures, gauges, and machinists' hand tools.

$57,700/yrJobs growth:

Welders, Cutters, Solderers, and Brazers

Use hand-welding, flame-cutting, hand-soldering, or brazing equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

$51,000/yrJobs growth:High school diploma or equivalent

Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to extrude or draw thermoplastic or metal materials into tubes, rods, hoses, wire, bars, or structural shapes.

$46,800/yrJobs growth:

Forging Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend forging machines to taper, shape, or form metal or plastic parts.

$46,800/yrJobs growth:

Rolling Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to roll steel or plastic forming bends, beads, knurls, rolls, or plate, or to flatten, temper, or reduce gauge of material.

$46,800/yrJobs growth:

Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material.

$46,800/yrJobs growth:

Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend drilling machines to drill, bore, ream, mill, or countersink metal or plastic work pieces.

$46,800/yrJobs growth:

Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.

$46,800/yrJobs growth:

Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend lathe and turning machines to turn, bore, thread, form, or face metal or plastic materials, such as wire, rod, or bar stock.

$46,800/yrJobs growth:

Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend milling or planing machines to mill, plane, shape, groove, or profile metal or plastic work pieces.

$46,800/yrJobs growth:
About This Data

Source: U.S. Department of Education College Scorecard (October 2025 release)

Population: Graduates who received federal financial aid (Title IV grants or loans). At Navajo Technical University, approximately 49% of students receive Pell grants. Students who did not receive federal aid are not included in these figures.

Earnings: Median earnings from IRS W-2 data for graduates who are employed and not enrolled in further education, measured 1 year after completion. Earnings are pre-tax and include wages, salaries, and self-employment income.

Debt: Median cumulative federal loan debt at graduation. Does not include private loans or Parent PLUS loans borrowed on behalf of students.

Estimated Earnings: Actual earnings data is not available for this program (typically due to privacy thresholds when fewer than 30 graduates reported earnings). The estimate shown is based on the national median of 299 similar programs. Actual outcomes may vary.