Location: Las Cruces, NM•In-State Tuition: $2,322•Out-of-State Tuition: $6,360
Est. Earnings (1yr)
$36,248
Est. from national median (299 programs)
Est. Median Debt
$7,913
Est. from national median (94 programs)

Analysis

A debt load around $7,900 for a certificate in precision metal work tells you something important: this is designed as a quick entry point to employment, not a four-year commitment. Comparable programs nationally suggest first-year earnings near $36,200, which would make that debt manageable—you're looking at roughly 22 cents of debt for every dollar earned in year one. That's a reasonable ratio for a skilled trade credential, especially when you consider the time investment is measured in months, not years.

The challenge is that we're working with estimates here because New Mexico State-Dona Ana's graduate cohort was too small for the Department of Education to report specific outcomes. What we know from peer programs is that precision metalworking tends to produce steady if modest earnings, and this school's debt estimate falls below the national median of $9,000 for similar certificates. In a region where Pell eligibility runs at 34%, keeping costs contained matters.

The practical question is whether this specific program connects graduates to local manufacturing or fabrication employers. A certificate is only valuable if it opens doors quickly, and in a specialized field like metalworking, that depends heavily on regional industry demand and the school's shop equipment and instructor connections. Before enrolling, verify what companies hire from this program and whether the training matches current industry standards in southern New Mexico.

Where New Mexico State University-Dona Ana Stands

Earnings vs. debt across all precision metal working certificate's programs nationally

New Mexico State University-Dona Ana (estimated ±10%)Other precision metal working programs

Dashed lines show national medians. Upper-left = best value.

Compare to Similar Programs Nationally

Precision Metal Working certificate's programs at top institutions nationally

Scroll to see more →

SchoolIn-State TuitionEarnings (1yr)*Earnings (4yr)Median Debt*Debt/Earnings
New Mexico State University-Dona AnaLas Cruces$2,322$36,248*—$7,913*—
Ferris State UniversityBig Rapids$13,630$68,852*$74,137$21,765*0.32
Idaho State UniversityPocatello$8,356$64,581*$55,405$9,000*0.14
Southcentral Kentucky Community and Technical CollegeBowling Green$4,656$58,996*—$9,413*0.16
Fox Valley Technical CollegeAppleton$4,916$53,507*$52,715$7,664*0.14
Elizabethtown Community and Technical CollegeElizabethtown$4,656$53,172*—$7,166*0.13
National Median—$36,248*—$9,000*0.25
* Estimated from similar programs

Career Paths

Occupations commonly associated with precision metal working graduates

Sheet Metal Workers

Fabricate, assemble, install, and repair sheet metal products and equipment, such as ducts, control boxes, drainpipes, and furnace casings. Work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; or inspecting, assembling, and smoothing seams and joints of burred surfaces. Includes sheet metal duct installers who install prefabricated sheet metal ducts used for heating, air conditioning, or other purposes.

$60,850/yrJobs growth:High school diploma or equivalent

Machinists

Set up and operate a variety of machine tools to produce precision parts and instruments out of metal. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures.

$57,700/yrJobs growth:

Tool and Die Makers

Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, jigs, fixtures, gauges, and machinists' hand tools.

$57,700/yrJobs growth:

Welders, Cutters, Solderers, and Brazers

Use hand-welding, flame-cutting, hand-soldering, or brazing equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

$51,000/yrJobs growth:High school diploma or equivalent

Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to extrude or draw thermoplastic or metal materials into tubes, rods, hoses, wire, bars, or structural shapes.

$46,800/yrJobs growth:

Forging Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend forging machines to taper, shape, or form metal or plastic parts.

$46,800/yrJobs growth:

Rolling Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to roll steel or plastic forming bends, beads, knurls, rolls, or plate, or to flatten, temper, or reduce gauge of material.

$46,800/yrJobs growth:

Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material.

$46,800/yrJobs growth:

Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend drilling machines to drill, bore, ream, mill, or countersink metal or plastic work pieces.

$46,800/yrJobs growth:

Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.

$46,800/yrJobs growth:

Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend lathe and turning machines to turn, bore, thread, form, or face metal or plastic materials, such as wire, rod, or bar stock.

$46,800/yrJobs growth:

Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend milling or planing machines to mill, plane, shape, groove, or profile metal or plastic work pieces.

$46,800/yrJobs growth:
About This Data

Source: U.S. Department of Education College Scorecard (October 2025 release)

Population: Graduates who received federal financial aid (Title IV grants or loans). At New Mexico State University-Dona Ana, approximately 34% of students receive Pell grants. Students who did not receive federal aid are not included in these figures.

Earnings: Median earnings from IRS W-2 data for graduates who are employed and not enrolled in further education, measured 1 year after completion. Earnings are pre-tax and include wages, salaries, and self-employment income.

Debt: Median cumulative federal loan debt at graduation. Does not include private loans or Parent PLUS loans borrowed on behalf of students.

Estimated Earnings: Actual earnings data is not available for this program (typically due to privacy thresholds when fewer than 30 graduates reported earnings). The estimate shown is based on the national median of 299 similar programs. Actual outcomes may vary.