Precision Metal Working (Undergraduate Certificate or Diploma) at North Idaho College

Est. Earnings (1yr)

$36,248

Est. from national median (299 programs)

Est. Median Debt

$7,913

Est. from national median (94 programs)

Analysis

This program's estimated debt load of $7,913 looks manageable on paper, but the earnings picture raises questions. Based on comparable precision metal working programs nationally, first-year earnings around $36,000 translate to a debt-to-earnings ratio of 0.22—theoretically comfortable territory. However, other Idaho programs in this field report significantly higher outcomes: the state median sits at $51,946, with Idaho State University graduates earning $64,581 and even College of Western Idaho hitting $39,310.

The gap matters practically. If North Idaho College's actual outcomes track closer to peer programs in the state rather than the national average used for this estimate, graduates would be well-positioned in Idaho's manufacturing economy. But if they align with the lower national figure, they'd be earning $15,000 less annually than typical Idaho peers—a substantial difference when building a career foundation. The four-year earnings figure of $45,923 suggests some wage growth, but still falls short of what other Idaho programs achieve in year one.

Given the uncertainty, focus on what's verifiable: talk to current students and recent graduates about their actual job placements and starting wages. North Idaho College may have strong employer connections that aren't reflected in these estimates, or the lower figures might be accurate. Without confirmed outcomes data for this specific program, you're evaluating based on what similar programs typically produce rather than what this school actually delivers.

Where North Idaho College Stands

Earnings vs. debt across all precision metal working certificate's programs nationally

Earnings Over Time

How earnings evolve from 1 year to 4 years after graduation

School	1 Year	4 Years	Growth
North Idaho College	—	$45,923	—
Ferris State University	$68,852	$74,137	+8%
Alexandria Technical & Community College	$51,141	$55,483	+8%
Idaho State University	$64,581	$55,405	-14%
College of Western Idaho	$39,310	$46,675	+19%

Compare to Similar Programs in Idaho

Precision Metal Working certificate's programs at peer institutions in Idaho (6 total in state)

Scroll to see more →

School	In-State Tuition	Earnings (1yr)*	Earnings (4yr)	Median Debt*	Debt/Earnings
North Idaho CollegeCoeur d'Alene	$3,396	$36,248*	$45,923	$7,913*	—
Idaho State UniversityPocatello	$8,356	$64,581*	$55,405	$9,000*	0.14
College of Western IdahoNampa	$3,336	$39,310*	$46,675	$7,000*	0.18
National Median	—	$36,248*	—	$9,000*	0.25

* Estimated from similar programs

Career Paths

Occupations commonly associated with precision metal working graduates

Sheet Metal Workers

Fabricate, assemble, install, and repair sheet metal products and equipment, such as ducts, control boxes, drainpipes, and furnace casings. Work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; or inspecting, assembling, and smoothing seams and joints of burred surfaces. Includes sheet metal duct installers who install prefabricated sheet metal ducts used for heating, air conditioning, or other purposes.

$60,850/yrJobs growth:High school diploma or equivalent

Machinists

Set up and operate a variety of machine tools to produce precision parts and instruments out of metal. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures.

$57,700/yrJobs growth:

Tool and Die Makers

Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, jigs, fixtures, gauges, and machinists' hand tools.

$57,700/yrJobs growth:

Welders, Cutters, Solderers, and Brazers

Use hand-welding, flame-cutting, hand-soldering, or brazing equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

$51,000/yrJobs growth:High school diploma or equivalent

Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to extrude or draw thermoplastic or metal materials into tubes, rods, hoses, wire, bars, or structural shapes.

$46,800/yrJobs growth:

Forging Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend forging machines to taper, shape, or form metal or plastic parts.

$46,800/yrJobs growth:

Rolling Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to roll steel or plastic forming bends, beads, knurls, rolls, or plate, or to flatten, temper, or reduce gauge of material.

$46,800/yrJobs growth:

Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material.

$46,800/yrJobs growth:

Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend drilling machines to drill, bore, ream, mill, or countersink metal or plastic work pieces.

$46,800/yrJobs growth:

Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.

$46,800/yrJobs growth:

Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend lathe and turning machines to turn, bore, thread, form, or face metal or plastic materials, such as wire, rod, or bar stock.

$46,800/yrJobs growth:

Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend milling or planing machines to mill, plane, shape, groove, or profile metal or plastic work pieces.

$46,800/yrJobs growth:

About This Data

Source: U.S. Department of Education College Scorecard (October 2025 release)

Population: Graduates who received federal financial aid (Title IV grants or loans). At North Idaho College, approximately 25% of students receive Pell grants. Students who did not receive federal aid are not included in these figures.

Earnings: Median earnings from IRS W-2 data for graduates who are employed and not enrolled in further education, measured 1 year after completion. Earnings are pre-tax and include wages, salaries, and self-employment income.

Debt: Median cumulative federal loan debt at graduation. Does not include private loans or Parent PLUS loans borrowed on behalf of students.

Estimated Earnings: Actual earnings data is not available for this program (typically due to privacy thresholds when fewer than 30 graduates reported earnings). The estimate shown is based on the national median of 299 similar programs. Actual outcomes may vary.