Precision Metal Working (Associate's Degree) at Northern Maine Community College

Est. Earnings (1yr)

$41,504

Est. from national median (56 programs)

Est. Median Debt

$11,562

Est. from national median (20 programs)

Analysis

Northern Maine Community College's precision metal working program suggests a manageable debt load based on what similar programs nationally produce—an estimated $11,562 against first-year earnings around $41,500. That 0.28 debt-to-earnings ratio is solidly in reasonable territory for a two-year technical credential. However, it's worth noting that comparable programs in Maine typically show stronger outcomes, with the state median at $44,690, suggesting graduates elsewhere in Maine are earning about $3,000 more annually in their first year.

The bigger question is opportunity cost in rural northern Maine. Precision metal working is specialized training that should lead directly to employment, but job density matters significantly for skilled trades. With only seven programs statewide and Maine's manufacturing sector concentrated in southern and coastal regions, graduates may need geographic flexibility to maximize their earning potential. The estimated figures here track below Maine's state median for this field, which could reflect regional wage differences or simply the limitations of national estimation when actual program data isn't available.

For families comfortable with northern Maine's employment landscape or willing to relocate after graduation, this appears financially viable—the debt burden won't be crushing even at the conservative end of the earnings range. But confirm job placement rates and employer partnerships directly with the college, since those practical connections matter more than estimated earnings when you're investing in hands-on technical training.

Where Northern Maine Community College Stands

Earnings vs. debt across all precision metal working associates's programs nationally

Compare to Similar Programs in Maine

Precision Metal Working associates's programs at peer institutions in Maine (7 total in state)

Scroll to see more →

School	In-State Tuition	Earnings (1yr)*	Earnings (4yr)	Median Debt*	Debt/Earnings
Northern Maine Community CollegePresque Isle	$3,880	$41,504*	—	$11,562*	—
Beal UniversityBangor	—	$44,690*	—	$13,541*	0.30
National Median	—	$41,504*	—	$12,000*	0.29

* Estimated from similar programs

Career Paths

Occupations commonly associated with precision metal working graduates

Sheet Metal Workers

Fabricate, assemble, install, and repair sheet metal products and equipment, such as ducts, control boxes, drainpipes, and furnace casings. Work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; or inspecting, assembling, and smoothing seams and joints of burred surfaces. Includes sheet metal duct installers who install prefabricated sheet metal ducts used for heating, air conditioning, or other purposes.

$60,850/yrJobs growth:High school diploma or equivalent

Machinists

Set up and operate a variety of machine tools to produce precision parts and instruments out of metal. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures.

$57,700/yrJobs growth:

Tool and Die Makers

Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, jigs, fixtures, gauges, and machinists' hand tools.

$57,700/yrJobs growth:

Welders, Cutters, Solderers, and Brazers

Use hand-welding, flame-cutting, hand-soldering, or brazing equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

$51,000/yrJobs growth:High school diploma or equivalent

Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to extrude or draw thermoplastic or metal materials into tubes, rods, hoses, wire, bars, or structural shapes.

$46,800/yrJobs growth:

Forging Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend forging machines to taper, shape, or form metal or plastic parts.

$46,800/yrJobs growth:

Rolling Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to roll steel or plastic forming bends, beads, knurls, rolls, or plate, or to flatten, temper, or reduce gauge of material.

$46,800/yrJobs growth:

Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material.

$46,800/yrJobs growth:

Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend drilling machines to drill, bore, ream, mill, or countersink metal or plastic work pieces.

$46,800/yrJobs growth:

Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.

$46,800/yrJobs growth:

Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend lathe and turning machines to turn, bore, thread, form, or face metal or plastic materials, such as wire, rod, or bar stock.

$46,800/yrJobs growth:

Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend milling or planing machines to mill, plane, shape, groove, or profile metal or plastic work pieces.

$46,800/yrJobs growth:

About This Data

Source: U.S. Department of Education College Scorecard (October 2025 release)

Population: Graduates who received federal financial aid (Title IV grants or loans). At Northern Maine Community College, approximately 42% of students receive Pell grants. Students who did not receive federal aid are not included in these figures.

Earnings: Median earnings from IRS W-2 data for graduates who are employed and not enrolled in further education, measured 1 year after completion. Earnings are pre-tax and include wages, salaries, and self-employment income.

Debt: Median cumulative federal loan debt at graduation. Does not include private loans or Parent PLUS loans borrowed on behalf of students.

Estimated Earnings: Actual earnings data is not available for this program (typically due to privacy thresholds when fewer than 30 graduates reported earnings). The estimate shown is based on the national median of 56 similar programs. Actual outcomes may vary.