Precision Metal Working (Undergraduate Certificate or Diploma) at Penta County Joint Vocational School

Est. Earnings (1yr)

$38,713

Est. from OH median (14 programs)

Est. Median Debt

$6,203

Est. from OH median (4 programs)

Analysis

A $6,200 investment for training that leads to nearly $39,000 in first-year earnings represents one of the strongest debt-to-earnings ratios you'll find in skilled trades education. Based on comparable precision metalworking programs across Ohio, Penta's certificate appears positioned right at the state median for earnings while carrying significantly less debt than typical—Ohio programs average $9,500 in borrowing. That 0.16 debt ratio means graduates would need roughly two months of gross income to cover what they borrowed, making this one of the more manageable financial commitments in vocational training.

What's harder to assess is whether Penta's program can match the performance of top Ohio schools in this field, where first-year earnings reach into the mid-$40,000s. The estimated earnings figure comes from pooling data across 14 Ohio metalworking programs, so there's real variation in outcomes depending on the school's industry connections and the local job market around Perrysburg. The extremely low Pell grant percentage (4%) suggests most students here are accessing this training without federal aid, which may indicate strong family support or alternative funding sources.

The practical upside: even if actual outcomes fall somewhat below the state median, the low debt load creates a safety margin that more expensive programs don't offer. For a student ready to enter precision manufacturing immediately after training, this combination of modest cost and solid earning potential makes financial sense—but visiting the school to understand their job placement track record would help confirm whether they're closer to the $39,000 estimate or the $45,000 top-tier programs achieve.

Where Penta County Joint Vocational School Stands

Earnings vs. debt across all precision metal working certificate's programs nationally

Compare to Similar Programs in Ohio

Precision Metal Working certificate's programs at peer institutions in Ohio (61 total in state)

Scroll to see more →

School	In-State Tuition	Earnings (1yr)*	Earnings (4yr)	Median Debt*	Debt/Earnings
Penta County Joint Vocational SchoolPerrysburg	—	$38,713*	—	$6,203*	—
Hobart Institute of Welding TechnologyTroy	—	$45,370*	$47,472	$5,500*	0.12
Butler Technology and Career Development SchoolsMonroe	—	$42,625*	—	$6,327*	0.15
Great Oaks Career CampusesCincinnati	—	$41,277*	$38,354	$6,078*	0.15
Fortis College-Cuyahoga FallsCuyahoga Falls	$14,050	$39,990*	$35,129	—*	—
Eastland-Fairfield Career and Technical SchoolsGroveport	—	$39,328*	$44,145	$6,485*	0.16
National Median	—	$36,248*	—	$9,000*	0.25

* Estimated from similar programs

Career Paths

Occupations commonly associated with precision metal working graduates

Sheet Metal Workers

Fabricate, assemble, install, and repair sheet metal products and equipment, such as ducts, control boxes, drainpipes, and furnace casings. Work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; or inspecting, assembling, and smoothing seams and joints of burred surfaces. Includes sheet metal duct installers who install prefabricated sheet metal ducts used for heating, air conditioning, or other purposes.

$60,850/yrJobs growth:High school diploma or equivalent

Machinists

Set up and operate a variety of machine tools to produce precision parts and instruments out of metal. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures.

$57,700/yrJobs growth:

Tool and Die Makers

Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, jigs, fixtures, gauges, and machinists' hand tools.

$57,700/yrJobs growth:

Welders, Cutters, Solderers, and Brazers

Use hand-welding, flame-cutting, hand-soldering, or brazing equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

$51,000/yrJobs growth:High school diploma or equivalent

Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to extrude or draw thermoplastic or metal materials into tubes, rods, hoses, wire, bars, or structural shapes.

$46,800/yrJobs growth:

Forging Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend forging machines to taper, shape, or form metal or plastic parts.

$46,800/yrJobs growth:

Rolling Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to roll steel or plastic forming bends, beads, knurls, rolls, or plate, or to flatten, temper, or reduce gauge of material.

$46,800/yrJobs growth:

Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material.

$46,800/yrJobs growth:

Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend drilling machines to drill, bore, ream, mill, or countersink metal or plastic work pieces.

$46,800/yrJobs growth:

Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.

$46,800/yrJobs growth:

Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend lathe and turning machines to turn, bore, thread, form, or face metal or plastic materials, such as wire, rod, or bar stock.

$46,800/yrJobs growth:

Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend milling or planing machines to mill, plane, shape, groove, or profile metal or plastic work pieces.

$46,800/yrJobs growth:

About This Data

Source: U.S. Department of Education College Scorecard (October 2025 release)

Population: Graduates who received federal financial aid (Title IV grants or loans). At Penta County Joint Vocational School, approximately 4% of students receive Pell grants. Students who did not receive federal aid are not included in these figures.

Earnings: Median earnings from IRS W-2 data for graduates who are employed and not enrolled in further education, measured 1 year after completion. Earnings are pre-tax and include wages, salaries, and self-employment income.

Debt: Median cumulative federal loan debt at graduation. Does not include private loans or Parent PLUS loans borrowed on behalf of students.

Estimated Earnings: Actual earnings data is not available for this program (typically due to privacy thresholds when fewer than 30 graduates reported earnings). The estimate shown is based on the median of 14 similar programs in OH. Actual outcomes may vary.