Precision Metal Working (Undergraduate Certificate or Diploma) at Pine Technical & Community College

Est. Earnings (1yr)

$49,342

Est. from MN median (13 programs)

Est. Median Debt

$9,500

Est. from MN median (11 programs)

Analysis

In Minnesota's competitive precision metalworking landscape, Pine Technical's program appears to track closely with state norms, where similar certificates typically lead to first-year earnings around $49,000—well above the national median of $36,000. While this specific program lacks reported graduate outcomes due to small cohort sizes, Minnesota's metalworking programs consistently outperform national peers, with top state programs placing graduates between $50,000 and $52,000 in their first year.

The estimated debt load of $9,500 creates a favorable ratio of just 0.19, meaning graduates would dedicate roughly two months of first-year earnings to debt repayment if they paid it off immediately. This compares favorably to both state and national debt medians for this credential. The relatively low Pell grant percentage (15%) suggests this may be a program attracting students who already have some financial stability, though that shouldn't be interpreted as a quality indicator.

The uncertainty here matters: without actual graduate data from Pine Technical specifically, you're betting that this program performs like the state average rather than significantly above or below it. Given Minnesota's strong metalworking industry and the program's alignment with peer institutions, that's likely a reasonable assumption. If your student is mechanically inclined and the geography works, the debt-to-earnings picture based on comparable programs suggests manageable financial risk—just recognize you're working from industry patterns rather than this school's track record.

Where Pine Technical & Community College Stands

Earnings vs. debt across all precision metal working certificate's programs nationally

Compare to Similar Programs in Minnesota

Precision Metal Working certificate's programs at peer institutions in Minnesota (22 total in state)

Scroll to see more →

School	In-State Tuition	Earnings (1yr)*	Earnings (4yr)	Median Debt*	Debt/Earnings
Pine Technical & Community CollegePine City	$4,681	$49,342*	—	$9,500*	—
Hennepin Technical CollegeBrooklyn Park	$5,881	$52,456*	$52,821	$9,329*	0.18
Alexandria Technical & Community CollegeAlexandria	$6,213	$51,141*	$55,483	$9,500*	0.19
Saint Paul CollegeSaint Paul	$6,318	$50,842*	$50,851	$9,928*	0.20
Dakota County Technical CollegeRosemount	$6,419	$50,464*	$45,038	$5,500*	0.11
St Cloud Technical and Community CollegeSaint Cloud	$4,957	$49,636*	$52,427	$9,500*	0.19
National Median	—	$36,248*	—	$9,000*	0.25

* Estimated from similar programs

Career Paths

Occupations commonly associated with precision metal working graduates

Sheet Metal Workers

Fabricate, assemble, install, and repair sheet metal products and equipment, such as ducts, control boxes, drainpipes, and furnace casings. Work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; or inspecting, assembling, and smoothing seams and joints of burred surfaces. Includes sheet metal duct installers who install prefabricated sheet metal ducts used for heating, air conditioning, or other purposes.

$60,850/yrJobs growth:High school diploma or equivalent

Machinists

Set up and operate a variety of machine tools to produce precision parts and instruments out of metal. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures.

$57,700/yrJobs growth:

Tool and Die Makers

Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, jigs, fixtures, gauges, and machinists' hand tools.

$57,700/yrJobs growth:

Welders, Cutters, Solderers, and Brazers

Use hand-welding, flame-cutting, hand-soldering, or brazing equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

$51,000/yrJobs growth:High school diploma or equivalent

Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to extrude or draw thermoplastic or metal materials into tubes, rods, hoses, wire, bars, or structural shapes.

$46,800/yrJobs growth:

Forging Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend forging machines to taper, shape, or form metal or plastic parts.

$46,800/yrJobs growth:

Rolling Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to roll steel or plastic forming bends, beads, knurls, rolls, or plate, or to flatten, temper, or reduce gauge of material.

$46,800/yrJobs growth:

Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material.

$46,800/yrJobs growth:

Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend drilling machines to drill, bore, ream, mill, or countersink metal or plastic work pieces.

$46,800/yrJobs growth:

Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.

$46,800/yrJobs growth:

Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend lathe and turning machines to turn, bore, thread, form, or face metal or plastic materials, such as wire, rod, or bar stock.

$46,800/yrJobs growth:

Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend milling or planing machines to mill, plane, shape, groove, or profile metal or plastic work pieces.

$46,800/yrJobs growth:

About This Data

Source: U.S. Department of Education College Scorecard (October 2025 release)

Population: Graduates who received federal financial aid (Title IV grants or loans). At Pine Technical & Community College, approximately 15% of students receive Pell grants. Students who did not receive federal aid are not included in these figures.

Earnings: Median earnings from IRS W-2 data for graduates who are employed and not enrolled in further education, measured 1 year after completion. Earnings are pre-tax and include wages, salaries, and self-employment income.

Debt: Median cumulative federal loan debt at graduation. Does not include private loans or Parent PLUS loans borrowed on behalf of students.

Estimated Earnings: Actual earnings data is not available for this program (typically due to privacy thresholds when fewer than 30 graduates reported earnings). The estimate shown is based on the median of 13 similar programs in MN. Actual outcomes may vary.