Location: Pratt, KS•In-State Tuition: $4,064•Out-of-State Tuition: $4,712
Est. Earnings (1yr)
$36,490
Est. from KS median (6 programs)
Est. Median Debt
$6,642
Est. from KS median (4 programs)

Analysis

Is there a sweet spot for skilled trades training? Drawing from six similar metalworking certificate programs across Kansas, Pratt's estimated outcomes suggest first-year earnings around $36,490 against roughly $6,600 in debt—a manageable 18% debt-to-earnings ratio that puts borrowed money well within reach of early paychecks. That debt figure notably undercuts the national median of $9,000 for metalworking programs, which matters when you're working with trade school economics where every thousand dollars counts.

The challenge here is visibility. Kansas has 23 programs in this field, and the handful with reported data—like Washburn Institute of Technology at $39,720—show a range of about $5,600 between the stronger and weaker outcomes. Pratt's estimated position lands in the middle of this pack, neither standout nor worrisome, but without actual graduate data from this specific program, you're making decisions based on what peer schools typically produce rather than proven track record.

For parents evaluating this investment, the debt load looks reasonable and metalworking skills translate directly to paychecks, but the lack of program-specific outcomes means you're betting on Pratt delivering results similar to the Kansas average. If hands-on training quality and job placement matter as much in metalworking as industry veterans suggest, visiting the shop floor and talking to instructors about employer connections would tell you more than these estimated figures can.

Where Pratt Community College Stands

Earnings vs. debt across all precision metal working certificate's programs nationally

Pratt Community College (estimated ±10%)Other precision metal working programs

Dashed lines show national medians. Upper-left = best value.

Compare to Similar Programs in Kansas

Precision Metal Working certificate's programs at peer institutions in Kansas (23 total in state)

Scroll to see more →

SchoolIn-State TuitionEarnings (1yr)*Earnings (4yr)Median Debt*Debt/Earnings
Pratt Community CollegePratt$4,064$36,490*—$6,642*—
Washburn Institute of TechnologyTopeka$9,120$39,720*$35,996$6,642*0.17
Washburn UniversityTopeka$9,578$39,720*$35,996$6,642*0.17
Flint Hills Technical CollegeEmporia$6,196$36,731*——*—
Kansas City Kansas Community CollegeKansas City$3,150$36,248*$51,614—*—
Manhattan Area Technical CollegeManhattan$9,276$34,077*$42,926$8,250*0.24
National Median—$36,248*—$9,000*0.25
* Estimated from similar programs

Career Paths

Occupations commonly associated with precision metal working graduates

Sheet Metal Workers

Fabricate, assemble, install, and repair sheet metal products and equipment, such as ducts, control boxes, drainpipes, and furnace casings. Work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; or inspecting, assembling, and smoothing seams and joints of burred surfaces. Includes sheet metal duct installers who install prefabricated sheet metal ducts used for heating, air conditioning, or other purposes.

$60,850/yrJobs growth:High school diploma or equivalent

Machinists

Set up and operate a variety of machine tools to produce precision parts and instruments out of metal. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures.

$57,700/yrJobs growth:

Tool and Die Makers

Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, jigs, fixtures, gauges, and machinists' hand tools.

$57,700/yrJobs growth:

Welders, Cutters, Solderers, and Brazers

Use hand-welding, flame-cutting, hand-soldering, or brazing equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

$51,000/yrJobs growth:High school diploma or equivalent

Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to extrude or draw thermoplastic or metal materials into tubes, rods, hoses, wire, bars, or structural shapes.

$46,800/yrJobs growth:

Forging Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend forging machines to taper, shape, or form metal or plastic parts.

$46,800/yrJobs growth:

Rolling Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to roll steel or plastic forming bends, beads, knurls, rolls, or plate, or to flatten, temper, or reduce gauge of material.

$46,800/yrJobs growth:

Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material.

$46,800/yrJobs growth:

Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend drilling machines to drill, bore, ream, mill, or countersink metal or plastic work pieces.

$46,800/yrJobs growth:

Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.

$46,800/yrJobs growth:

Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend lathe and turning machines to turn, bore, thread, form, or face metal or plastic materials, such as wire, rod, or bar stock.

$46,800/yrJobs growth:

Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend milling or planing machines to mill, plane, shape, groove, or profile metal or plastic work pieces.

$46,800/yrJobs growth:
About This Data

Source: U.S. Department of Education College Scorecard (October 2025 release)

Population: Graduates who received federal financial aid (Title IV grants or loans). At Pratt Community College, approximately 19% of students receive Pell grants. Students who did not receive federal aid are not included in these figures.

Earnings: Median earnings from IRS W-2 data for graduates who are employed and not enrolled in further education, measured 1 year after completion. Earnings are pre-tax and include wages, salaries, and self-employment income.

Debt: Median cumulative federal loan debt at graduation. Does not include private loans or Parent PLUS loans borrowed on behalf of students.

Estimated Earnings: Actual earnings data is not available for this program (typically due to privacy thresholds when fewer than 30 graduates reported earnings). The estimate shown is based on the median of 6 similar programs in KS. Actual outcomes may vary.