Location: Wentworth, NC•In-State Tuition: $1,966•Out-of-State Tuition: $6,574
Est. Earnings (1yr)
$37,004
Est. from NC median (6 programs)
Est. Median Debt
$7,913
Est. from national median (94 programs)

Analysis

At an estimated $7,913 in debt, this certificate program costs roughly half what similar metalworking programs typically require nationally—a genuine advantage when first-year earnings hover around $37,000. Based on comparable programs across North Carolina, graduates can expect to earn close to the state median, putting them in the middle of the pack alongside larger technical colleges. The debt-to-earnings ratio of 0.21 suggests manageable repayment, though these figures come from peer programs rather than Rockingham's specific outcomes.

The challenge is that metalworking certificates don't show dramatic earnings growth in their first years, meaning that $37,000 estimate represents fairly steady entry-level territory. Similar programs at Davidson-Davie and NASCAR Technical Institute report slightly higher outcomes, but Rockingham's lower estimated debt burden could offset that difference over time. For families where the 44% Pell grant rate suggests affordability matters, keeping borrowing under $8,000 for workforce credentials makes practical sense.

The bottom line: This looks like a reasonable path into skilled trades without excessive debt, but since both the earnings and debt figures are estimates, confirm current job placement rates and starting wages with the program directly before enrolling.

Where Rockingham Community College Stands

Earnings vs. debt across all precision metal working certificate's programs nationally

Rockingham Community College (estimated ±10%)Other precision metal working programs

Dashed lines show national medians. Upper-left = best value.

Compare to Similar Programs in North Carolina

Precision Metal Working certificate's programs at peer institutions in North Carolina (59 total in state)

Scroll to see more →

SchoolIn-State TuitionEarnings (1yr)*Earnings (4yr)Median Debt*Debt/Earnings
Rockingham Community CollegeWentworth$1,966$37,004*—$7,913*—
Davidson-Davie Community CollegeThomasville$1,978$39,990*—$11,000*0.28
NASCAR Technical InstituteMooresville—$37,568*—$10,593*0.28
Asheville-Buncombe Technical Community CollegeAsheville$2,882$37,078*——*—
Guilford Technical Community CollegeJamestown$2,319$36,930*$36,750—*—
Johnston Community CollegeSmithfield$2,657$34,171*——*—
National Median—$36,248*—$9,000*0.25
* Estimated from similar programs

Career Paths

Occupations commonly associated with precision metal working graduates

Sheet Metal Workers

Fabricate, assemble, install, and repair sheet metal products and equipment, such as ducts, control boxes, drainpipes, and furnace casings. Work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; or inspecting, assembling, and smoothing seams and joints of burred surfaces. Includes sheet metal duct installers who install prefabricated sheet metal ducts used for heating, air conditioning, or other purposes.

$60,850/yrJobs growth:High school diploma or equivalent

Machinists

Set up and operate a variety of machine tools to produce precision parts and instruments out of metal. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures.

$57,700/yrJobs growth:

Tool and Die Makers

Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, jigs, fixtures, gauges, and machinists' hand tools.

$57,700/yrJobs growth:

Welders, Cutters, Solderers, and Brazers

Use hand-welding, flame-cutting, hand-soldering, or brazing equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

$51,000/yrJobs growth:High school diploma or equivalent

Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to extrude or draw thermoplastic or metal materials into tubes, rods, hoses, wire, bars, or structural shapes.

$46,800/yrJobs growth:

Forging Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend forging machines to taper, shape, or form metal or plastic parts.

$46,800/yrJobs growth:

Rolling Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to roll steel or plastic forming bends, beads, knurls, rolls, or plate, or to flatten, temper, or reduce gauge of material.

$46,800/yrJobs growth:

Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material.

$46,800/yrJobs growth:

Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend drilling machines to drill, bore, ream, mill, or countersink metal or plastic work pieces.

$46,800/yrJobs growth:

Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.

$46,800/yrJobs growth:

Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend lathe and turning machines to turn, bore, thread, form, or face metal or plastic materials, such as wire, rod, or bar stock.

$46,800/yrJobs growth:

Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend milling or planing machines to mill, plane, shape, groove, or profile metal or plastic work pieces.

$46,800/yrJobs growth:
About This Data

Source: U.S. Department of Education College Scorecard (October 2025 release)

Population: Graduates who received federal financial aid (Title IV grants or loans). At Rockingham Community College, approximately 44% of students receive Pell grants. Students who did not receive federal aid are not included in these figures.

Earnings: Median earnings from IRS W-2 data for graduates who are employed and not enrolled in further education, measured 1 year after completion. Earnings are pre-tax and include wages, salaries, and self-employment income.

Debt: Median cumulative federal loan debt at graduation. Does not include private loans or Parent PLUS loans borrowed on behalf of students.

Estimated Earnings: Actual earnings data is not available for this program (typically due to privacy thresholds when fewer than 30 graduates reported earnings). The estimate shown is based on the median of 6 similar programs in NC. Actual outcomes may vary.