Precision Metal Working (Undergraduate Certificate or Diploma) at Saint Louis Community College

Est. Earnings (1yr)

$34,863

Est. from MO median (4 programs)

Est. Median Debt

$7,913

Est. from national median (94 programs)

Analysis

Precision metal working programs in Missouri show a wide earnings spread—from around $32,000 to $45,000 in the first year—and Saint Louis Community College's estimated outcomes land squarely in the middle of this range. Based on comparable programs statewide, first-year earnings around $35,000 paired with debt near $8,000 creates a manageable 0.23 debt-to-earnings ratio. That's roughly three months of gross pay to cover the entire credential cost, which is reasonable for a quick-turnaround certificate program. The modest Pell Grant enrollment (29%) suggests this program serves a mix of students, not exclusively those facing financial barriers.

What's harder to gauge is why earnings vary so dramatically among Missouri's metal working programs. Ranken Technical College's graduates start nearly $10,000 higher annually than those from peer institutions—a difference that could reflect employer relationships, equipment quality, or regional job markets rather than curriculum alone. Without actual outcome data for Saint Louis Community College specifically, you're essentially betting that their placement networks and industry connections mirror the state average rather than falling toward the lower end.

The bottom line: if your child can complete this certificate with debt close to the $8,000 estimate, the financial risk is contained. But before enrolling, push the school for concrete placement statistics and starting wage ranges with actual employers—those details matter more here than statewide averages suggest.

Where Saint Louis Community College Stands

Earnings vs. debt across all precision metal working certificate's programs nationally

Compare to Similar Programs in Missouri

Precision Metal Working certificate's programs at peer institutions in Missouri (23 total in state)

Scroll to see more →

School	In-State Tuition	Earnings (1yr)*	Earnings (4yr)	Median Debt*	Debt/Earnings
Saint Louis Community CollegeBridgeton	$3,660	$34,863*	—	$7,913*	—
Ranken Technical CollegeSaint Louis	$17,490	$45,004*	$49,350	$9,500*	0.21
Metropolitan Community College-Kansas CityKansas City	$3,630	$36,908*	—	—*	—
Ozarks Technical Community CollegeSpringfield	$4,184	$32,817*	$39,166	$4,737*	0.14
Midwest Technical Institute-MissouriSpringfield	—	$31,630*	$33,836	$9,500*	0.30
National Median	—	$36,248*	—	$9,000*	0.25

* Estimated from similar programs

Career Paths

Occupations commonly associated with precision metal working graduates

Sheet Metal Workers

Fabricate, assemble, install, and repair sheet metal products and equipment, such as ducts, control boxes, drainpipes, and furnace casings. Work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; or inspecting, assembling, and smoothing seams and joints of burred surfaces. Includes sheet metal duct installers who install prefabricated sheet metal ducts used for heating, air conditioning, or other purposes.

$60,850/yrJobs growth:High school diploma or equivalent

Machinists

Set up and operate a variety of machine tools to produce precision parts and instruments out of metal. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures.

$57,700/yrJobs growth:

Tool and Die Makers

Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, jigs, fixtures, gauges, and machinists' hand tools.

$57,700/yrJobs growth:

Welders, Cutters, Solderers, and Brazers

Use hand-welding, flame-cutting, hand-soldering, or brazing equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

$51,000/yrJobs growth:High school diploma or equivalent

Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to extrude or draw thermoplastic or metal materials into tubes, rods, hoses, wire, bars, or structural shapes.

$46,800/yrJobs growth:

Forging Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend forging machines to taper, shape, or form metal or plastic parts.

$46,800/yrJobs growth:

Rolling Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to roll steel or plastic forming bends, beads, knurls, rolls, or plate, or to flatten, temper, or reduce gauge of material.

$46,800/yrJobs growth:

Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material.

$46,800/yrJobs growth:

Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend drilling machines to drill, bore, ream, mill, or countersink metal or plastic work pieces.

$46,800/yrJobs growth:

Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.

$46,800/yrJobs growth:

Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend lathe and turning machines to turn, bore, thread, form, or face metal or plastic materials, such as wire, rod, or bar stock.

$46,800/yrJobs growth:

Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend milling or planing machines to mill, plane, shape, groove, or profile metal or plastic work pieces.

$46,800/yrJobs growth:

About This Data

Source: U.S. Department of Education College Scorecard (October 2025 release)

Population: Graduates who received federal financial aid (Title IV grants or loans). At Saint Louis Community College, approximately 29% of students receive Pell grants. Students who did not receive federal aid are not included in these figures.

Earnings: Median earnings from IRS W-2 data for graduates who are employed and not enrolled in further education, measured 1 year after completion. Earnings are pre-tax and include wages, salaries, and self-employment income.

Debt: Median cumulative federal loan debt at graduation. Does not include private loans or Parent PLUS loans borrowed on behalf of students.

Estimated Earnings: Actual earnings data is not available for this program (typically due to privacy thresholds when fewer than 30 graduates reported earnings). The estimate shown is based on the median of 4 similar programs in MO. Actual outcomes may vary.