Precision Metal Working (Associate's Degree) at Seward County Community College

Est. Earnings (1yr)

$41,504

Est. from national median (56 programs)

Est. Median Debt

$11,562

Est. from national median (20 programs)

Analysis

A debt-to-earnings ratio of 0.28 suggests relatively manageable borrowing for a technical credential, though the actual outcomes at Seward County remain unknown due to small graduating cohorts. Based on national data from similar precision metal working associate programs, first-year earnings around $41,500 would put graduates well above minimum wage work, with debt roughly equivalent to three months' gross pay. The challenge is that this estimate comes from 56 programs nationwide—there's no way to know whether Seward County's specific curriculum, equipment, or local employer relationships produce better or worse results than the national median.

The Kansas context adds another layer of uncertainty. With 17 schools offering this program statewide but none reporting sufficient graduate data, it's unclear whether the state's manufacturing sector supports strong entry wages for precision metalworkers or whether competition for jobs is particularly intense. National figures show considerable variation—top programs reach $47,500 in first-year earnings—suggesting that program quality and regional demand matter significantly.

For parents, the unknowns here are substantial. If your student is mechanically inclined and the program connects directly to local manufacturers with hiring pipelines, the estimated debt load isn't frightening. But you're essentially betting on a program's reputation and placement relationships without concrete graduate outcomes to verify those claims. Before committing, insist on speaking with recent graduates and securing employer contacts who actually hire from this program.

Where Seward County Community College Stands

Earnings vs. debt across all precision metal working associates's programs nationally

Compare to Similar Programs Nationally

Precision Metal Working associates's programs at top institutions nationally

Scroll to see more →

School	In-State Tuition	Earnings (1yr)*	Earnings (4yr)	Median Debt*	Debt/Earnings
Seward County Community CollegeLiberal	$3,744	$41,504*	—	$11,562*	—
Hennepin Technical CollegeBrooklyn Park	$5,881	$59,829*	$73,136	—*	—
Ferris State UniversityBig Rapids	$13,630	$56,811*	$77,380	$17,500*	0.31
Ivy Tech Community CollegeIndianapolis	$4,912	$56,292*	$64,893	$6,810*	0.12
Dunwoody College of TechnologyMinneapolis	$25,659	$55,188*	$61,261	$12,000*	0.22
Vincennes UniversityVincennes	$6,886	$54,908*	$52,065	$12,000*	0.22
National Median	—	$41,504*	—	$12,000*	0.29

* Estimated from similar programs

Career Paths

Occupations commonly associated with precision metal working graduates

Sheet Metal Workers

Fabricate, assemble, install, and repair sheet metal products and equipment, such as ducts, control boxes, drainpipes, and furnace casings. Work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; or inspecting, assembling, and smoothing seams and joints of burred surfaces. Includes sheet metal duct installers who install prefabricated sheet metal ducts used for heating, air conditioning, or other purposes.

$60,850/yrJobs growth:High school diploma or equivalent

Machinists

Set up and operate a variety of machine tools to produce precision parts and instruments out of metal. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures.

$57,700/yrJobs growth:

Tool and Die Makers

Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, jigs, fixtures, gauges, and machinists' hand tools.

$57,700/yrJobs growth:

Welders, Cutters, Solderers, and Brazers

Use hand-welding, flame-cutting, hand-soldering, or brazing equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

$51,000/yrJobs growth:High school diploma or equivalent

Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to extrude or draw thermoplastic or metal materials into tubes, rods, hoses, wire, bars, or structural shapes.

$46,800/yrJobs growth:

Forging Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend forging machines to taper, shape, or form metal or plastic parts.

$46,800/yrJobs growth:

Rolling Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to roll steel or plastic forming bends, beads, knurls, rolls, or plate, or to flatten, temper, or reduce gauge of material.

$46,800/yrJobs growth:

Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material.

$46,800/yrJobs growth:

Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend drilling machines to drill, bore, ream, mill, or countersink metal or plastic work pieces.

$46,800/yrJobs growth:

Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.

$46,800/yrJobs growth:

Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend lathe and turning machines to turn, bore, thread, form, or face metal or plastic materials, such as wire, rod, or bar stock.

$46,800/yrJobs growth:

Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend milling or planing machines to mill, plane, shape, groove, or profile metal or plastic work pieces.

$46,800/yrJobs growth:

About This Data

Source: U.S. Department of Education College Scorecard (October 2025 release)

Population: Graduates who received federal financial aid (Title IV grants or loans). At Seward County Community College, approximately 20% of students receive Pell grants. Students who did not receive federal aid are not included in these figures.

Earnings: Median earnings from IRS W-2 data for graduates who are employed and not enrolled in further education, measured 1 year after completion. Earnings are pre-tax and include wages, salaries, and self-employment income.

Debt: Median cumulative federal loan debt at graduation. Does not include private loans or Parent PLUS loans borrowed on behalf of students.

Estimated Earnings: Actual earnings data is not available for this program (typically due to privacy thresholds when fewer than 30 graduates reported earnings). The estimate shown is based on the national median of 56 similar programs. Actual outcomes may vary.