Location: Liberal, KS•In-State Tuition: $3,744•Out-of-State Tuition: $5,056
Est. Earnings (1yr)
$36,490
Est. from KS median (6 programs)
Est. Median Debt
$6,642
Est. from KS median (4 programs)

Analysis

This program's estimated debt load of $6,642 stands out immediately—roughly $2,400 below the national median for precision metal working certificates and among the lowest in Kansas. For a technical credential designed to lead directly to employment, starting your career with manageable debt matters as much as the paycheck itself.

Based on comparable programs across Kansas, first-year earnings hover around $36,490, which aligns almost exactly with the national median for this field. That consistency suggests precision metal working delivers relatively predictable outcomes regardless of where you train. The debt-to-earnings ratio of 0.18 means graduates would theoretically need less than three months of gross pay to cover their educational costs—a favorable position for anyone entering the workforce. However, these figures come from peer programs rather than Seward County's actual graduates, so there's inherent uncertainty about whether this specific program matches state trends.

The real question is whether $36,490 meets your family's expectations for a certificate program. It's skilled trade income, not poverty wages, but it's also not the $39,720 that top Kansas programs like Washburn Institute report. If low debt matters more than chasing the highest starting salary—and for many families it should—this estimated financial profile suggests a practical path forward, assuming the school's outcomes mirror its Kansas peers.

Where Seward County Community College Stands

Earnings vs. debt across all precision metal working certificate's programs nationally

Seward County Community College (estimated ±10%)Other precision metal working programs

Dashed lines show national medians. Upper-left = best value.

Compare to Similar Programs in Kansas

Precision Metal Working certificate's programs at peer institutions in Kansas (23 total in state)

Scroll to see more →

SchoolIn-State TuitionEarnings (1yr)*Earnings (4yr)Median Debt*Debt/Earnings
Seward County Community CollegeLiberal$3,744$36,490*—$6,642*—
Washburn Institute of TechnologyTopeka$9,120$39,720*$35,996$6,642*0.17
Washburn UniversityTopeka$9,578$39,720*$35,996$6,642*0.17
Flint Hills Technical CollegeEmporia$6,196$36,731*——*—
Kansas City Kansas Community CollegeKansas City$3,150$36,248*$51,614—*—
Manhattan Area Technical CollegeManhattan$9,276$34,077*$42,926$8,250*0.24
National Median—$36,248*—$9,000*0.25
* Estimated from similar programs

Career Paths

Occupations commonly associated with precision metal working graduates

Sheet Metal Workers

Fabricate, assemble, install, and repair sheet metal products and equipment, such as ducts, control boxes, drainpipes, and furnace casings. Work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; or inspecting, assembling, and smoothing seams and joints of burred surfaces. Includes sheet metal duct installers who install prefabricated sheet metal ducts used for heating, air conditioning, or other purposes.

$60,850/yrJobs growth:High school diploma or equivalent

Machinists

Set up and operate a variety of machine tools to produce precision parts and instruments out of metal. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures.

$57,700/yrJobs growth:

Tool and Die Makers

Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, jigs, fixtures, gauges, and machinists' hand tools.

$57,700/yrJobs growth:

Welders, Cutters, Solderers, and Brazers

Use hand-welding, flame-cutting, hand-soldering, or brazing equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

$51,000/yrJobs growth:High school diploma or equivalent

Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to extrude or draw thermoplastic or metal materials into tubes, rods, hoses, wire, bars, or structural shapes.

$46,800/yrJobs growth:

Forging Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend forging machines to taper, shape, or form metal or plastic parts.

$46,800/yrJobs growth:

Rolling Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to roll steel or plastic forming bends, beads, knurls, rolls, or plate, or to flatten, temper, or reduce gauge of material.

$46,800/yrJobs growth:

Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material.

$46,800/yrJobs growth:

Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend drilling machines to drill, bore, ream, mill, or countersink metal or plastic work pieces.

$46,800/yrJobs growth:

Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.

$46,800/yrJobs growth:

Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend lathe and turning machines to turn, bore, thread, form, or face metal or plastic materials, such as wire, rod, or bar stock.

$46,800/yrJobs growth:

Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend milling or planing machines to mill, plane, shape, groove, or profile metal or plastic work pieces.

$46,800/yrJobs growth:
About This Data

Source: U.S. Department of Education College Scorecard (October 2025 release)

Population: Graduates who received federal financial aid (Title IV grants or loans). At Seward County Community College, approximately 20% of students receive Pell grants. Students who did not receive federal aid are not included in these figures.

Earnings: Median earnings from IRS W-2 data for graduates who are employed and not enrolled in further education, measured 1 year after completion. Earnings are pre-tax and include wages, salaries, and self-employment income.

Debt: Median cumulative federal loan debt at graduation. Does not include private loans or Parent PLUS loans borrowed on behalf of students.

Estimated Earnings: Actual earnings data is not available for this program (typically due to privacy thresholds when fewer than 30 graduates reported earnings). The estimate shown is based on the median of 6 similar programs in KS. Actual outcomes may vary.