Precision Metal Working (Associate's Degree) at Snow College

Est. Earnings (1yr)

$41,504

Est. from national median (56 programs)

Est. Median Debt

$11,562

Est. from national median (20 programs)

Analysis

A debt-to-earnings ratio of 0.28 positions this program favorably compared to many technical credentials, though the figures come from national peer programs rather than Snow College's own graduates. Based on similar precision metalworking associate's programs nationwide, first-year earnings around $41,500 against roughly $11,500 in debt suggests you'd be borrowing about three months of salary—a manageable burden for entering a skilled trade. The precision metalworking field typically offers steady demand in manufacturing sectors, and Utah's growing industrial base could provide regional advantages beyond what national averages capture.

The challenge here is that Snow College serves a relatively small population in rural Utah, and the program's graduate numbers are too limited for the Department of Education to report actual outcomes. This means we can't verify whether their specific curriculum, instructor quality, or employer connections produce results that match or exceed what's typical nationally. The estimated earnings put graduates near the middle of the national range, with top programs reaching $47,500—leaving open the question of where Snow's program actually falls on that spectrum.

For a family considering this investment, the math looks reasonable on paper, but you're essentially betting on a program without a track record you can verify. Before committing, contact the department directly to ask about job placement rates, which employers hire their graduates, and whether students typically stay in Utah or need to relocate for work in this specialized field.

Where Snow College Stands

Earnings vs. debt across all precision metal working associates's programs nationally

Compare to Similar Programs Nationally

Precision Metal Working associates's programs at top institutions nationally

Scroll to see more →

School	In-State Tuition	Earnings (1yr)*	Earnings (4yr)	Median Debt*	Debt/Earnings
Snow CollegeEphraim	$4,564	$41,504*	—	$11,562*	—
Hennepin Technical CollegeBrooklyn Park	$5,881	$59,829*	$73,136	—*	—
Ferris State UniversityBig Rapids	$13,630	$56,811*	$77,380	$17,500*	0.31
Ivy Tech Community CollegeIndianapolis	$4,912	$56,292*	$64,893	$6,810*	0.12
Dunwoody College of TechnologyMinneapolis	$25,659	$55,188*	$61,261	$12,000*	0.22
Vincennes UniversityVincennes	$6,886	$54,908*	$52,065	$12,000*	0.22
National Median	—	$41,504*	—	$12,000*	0.29

* Estimated from similar programs

Career Paths

Occupations commonly associated with precision metal working graduates

Sheet Metal Workers

Fabricate, assemble, install, and repair sheet metal products and equipment, such as ducts, control boxes, drainpipes, and furnace casings. Work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; or inspecting, assembling, and smoothing seams and joints of burred surfaces. Includes sheet metal duct installers who install prefabricated sheet metal ducts used for heating, air conditioning, or other purposes.

$60,850/yrJobs growth:High school diploma or equivalent

Machinists

Set up and operate a variety of machine tools to produce precision parts and instruments out of metal. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures.

$57,700/yrJobs growth:

Tool and Die Makers

Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, jigs, fixtures, gauges, and machinists' hand tools.

$57,700/yrJobs growth:

Welders, Cutters, Solderers, and Brazers

Use hand-welding, flame-cutting, hand-soldering, or brazing equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

$51,000/yrJobs growth:High school diploma or equivalent

Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to extrude or draw thermoplastic or metal materials into tubes, rods, hoses, wire, bars, or structural shapes.

$46,800/yrJobs growth:

Forging Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend forging machines to taper, shape, or form metal or plastic parts.

$46,800/yrJobs growth:

Rolling Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to roll steel or plastic forming bends, beads, knurls, rolls, or plate, or to flatten, temper, or reduce gauge of material.

$46,800/yrJobs growth:

Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material.

$46,800/yrJobs growth:

Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend drilling machines to drill, bore, ream, mill, or countersink metal or plastic work pieces.

$46,800/yrJobs growth:

Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.

$46,800/yrJobs growth:

Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend lathe and turning machines to turn, bore, thread, form, or face metal or plastic materials, such as wire, rod, or bar stock.

$46,800/yrJobs growth:

Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend milling or planing machines to mill, plane, shape, groove, or profile metal or plastic work pieces.

$46,800/yrJobs growth:

About This Data

Source: U.S. Department of Education College Scorecard (October 2025 release)

Population: Graduates who received federal financial aid (Title IV grants or loans). At Snow College, approximately 21% of students receive Pell grants. Students who did not receive federal aid are not included in these figures.

Earnings: Median earnings from IRS W-2 data for graduates who are employed and not enrolled in further education, measured 1 year after completion. Earnings are pre-tax and include wages, salaries, and self-employment income.

Debt: Median cumulative federal loan debt at graduation. Does not include private loans or Parent PLUS loans borrowed on behalf of students.

Estimated Earnings: Actual earnings data is not available for this program (typically due to privacy thresholds when fewer than 30 graduates reported earnings). The estimate shown is based on the national median of 56 similar programs. Actual outcomes may vary.