Precision Metal Working (Associate's Degree) at Southcentral Kentucky Community and Technical College

Analysis

In Kentucky's precision metal working landscape, this program's $40,761 first-year earnings fall below what most comparable programs deliver—about $4,000 less than the state median and nearly $8,000 behind Elizabethtown Community and Technical College's graduates. While the estimated debt load of $11,562 seems manageable at just 28% of first-year income, that relatively low burden doesn't fully offset the earnings gap.

The concern here isn't crushing debt—peer programs nationally suggest borrowers in this field typically graduate with similar loads. Instead, it's that graduates appear to land on the lower end of the Kentucky precision metal working market. This could reflect local wage levels in Bowling Green versus other regions, the specific types of employers graduates connect with, or how the curriculum aligns with higher-paying specializations within the field.

For families considering this path, the key question is whether local employment opportunities justify settling for below-average Kentucky earnings. If your student has geographic flexibility, examining what makes programs like Elizabethtown's more lucrative might be worthwhile. If staying in the Bowling Green area is essential, investigate whether local manufacturers offer advancement paths that could close that earnings gap within a few years of graduation.

Where Southcentral Kentucky Community and Technical College Stands

Earnings vs. debt across all precision metal working associates's programs nationally

Earnings Distribution

How Southcentral Kentucky Community and Technical College graduates compare to all programs nationally

Compare to Similar Programs in Kentucky

Precision Metal Working associates's programs at peer institutions in Kentucky (11 total in state)

Scroll to see more →

School	In-State Tuition	Earnings (1yr)	Earnings (4yr)	Median Debt*	Debt/Earnings
Southcentral Kentucky Community and Technical CollegeBowling Green	$4,656	$40,761	—	$11,562*	—
Elizabethtown Community and Technical CollegeElizabethtown	$4,656	$48,709	—	—*	—
National Median	—	$41,504	—	$12,000*	0.29

* Estimated from similar programs

Career Paths

Occupations commonly associated with precision metal working graduates

Sheet Metal Workers

Fabricate, assemble, install, and repair sheet metal products and equipment, such as ducts, control boxes, drainpipes, and furnace casings. Work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; or inspecting, assembling, and smoothing seams and joints of burred surfaces. Includes sheet metal duct installers who install prefabricated sheet metal ducts used for heating, air conditioning, or other purposes.

$60,850/yrJobs growth:High school diploma or equivalent

Machinists

Set up and operate a variety of machine tools to produce precision parts and instruments out of metal. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures.

$57,700/yrJobs growth:

Tool and Die Makers

Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, jigs, fixtures, gauges, and machinists' hand tools.

$57,700/yrJobs growth:

Welders, Cutters, Solderers, and Brazers

Use hand-welding, flame-cutting, hand-soldering, or brazing equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

$51,000/yrJobs growth:High school diploma or equivalent

Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to extrude or draw thermoplastic or metal materials into tubes, rods, hoses, wire, bars, or structural shapes.

$46,800/yrJobs growth:

Forging Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend forging machines to taper, shape, or form metal or plastic parts.

$46,800/yrJobs growth:

Rolling Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to roll steel or plastic forming bends, beads, knurls, rolls, or plate, or to flatten, temper, or reduce gauge of material.

$46,800/yrJobs growth:

Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material.

$46,800/yrJobs growth:

Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend drilling machines to drill, bore, ream, mill, or countersink metal or plastic work pieces.

$46,800/yrJobs growth:

Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.

$46,800/yrJobs growth:

Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend lathe and turning machines to turn, bore, thread, form, or face metal or plastic materials, such as wire, rod, or bar stock.

$46,800/yrJobs growth:

Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend milling or planing machines to mill, plane, shape, groove, or profile metal or plastic work pieces.

$46,800/yrJobs growth:

About This Data

Source: U.S. Department of Education College Scorecard (October 2025 release)

Population: Graduates who received federal financial aid (Title IV grants or loans). At Southcentral Kentucky Community and Technical College, approximately 32% of students receive Pell grants. Students who did not receive federal aid are not included in these figures.

Earnings: Median earnings from IRS W-2 data for graduates who are employed and not enrolled in further education, measured 1 year after completion. Earnings are pre-tax and include wages, salaries, and self-employment income.

Debt: Median cumulative federal loan debt at graduation. Does not include private loans or Parent PLUS loans borrowed on behalf of students.

Sample Size: Based on 20 graduates with reported earnings and 11 graduates with debt data. Small samples may not be representative.