Precision Metal Working (Undergraduate Certificate or Diploma) at Southeastern Community College

Est. Earnings (1yr)

$41,613

Est. from IA median (7 programs)

Est. Median Debt

$5,500

Est. from IA median (5 programs)

Analysis

Is a fast-track certificate worth it when the earnings lag behind competing programs in Iowa? Comparable precision metal working programs across the state suggest first-year earnings around $41,600, placing Southeastern near the middle of Iowa's offerings but trailing stronger performers like Marshalltown and Hawkeye by roughly $4,000 annually. With estimated debt of just $5,500—well below the national median of $9,000 for this credential—the debt burden is manageable, resulting in a debt-to-earnings ratio of 0.13 that suggests graduates could pay off loans within months rather than years.

The real question is whether this program delivers the same training quality and employer connections as top Iowa schools in the field. Precision metal working is a hands-on trade where equipment, instructor experience, and local industry partnerships matter enormously. The suppressed data here means we can't verify what Southeastern's specific graduates actually earn, which creates uncertainty when peer programs show a $6,500 spread between the highest and lowest performers in the state.

Given the low debt load, this program won't sink your child financially even if outcomes fall below the state median. But if stronger programs are within commuting distance and cost roughly the same, the potential $4,000-$6,000 annual earnings gap could compound significantly over a career. Call Southeastern's placement office directly and ask where recent graduates are working and what they're earning—actual outcomes matter more than estimates based on peer schools.

Where Southeastern Community College Stands

Earnings vs. debt across all precision metal working certificate's programs nationally

Compare to Similar Programs in Iowa

Precision Metal Working certificate's programs at peer institutions in Iowa (15 total in state)

Scroll to see more →

School	In-State Tuition	Earnings (1yr)*	Earnings (4yr)	Median Debt*	Debt/Earnings
Southeastern Community CollegeWest Burlington	$6,300	$41,613*	—	$5,500*	—
Marshalltown Community CollegeMarshalltown	$5,304	$45,972*	—	—*	—
Hawkeye Community CollegeWaterloo	$6,308	$45,509*	$44,868	$7,874*	0.17
Northeast Iowa Community CollegeCalmar	$6,600	$43,588*	$49,983	$5,479*	0.13
Western Iowa Tech Community CollegeSioux City	$5,042	$41,613*	—	$7,910*	0.19
Des Moines Area Community CollegeAnkeny	$5,550	$39,397*	$43,506	$5,500*	0.14
National Median	—	$36,248*	—	$9,000*	0.25

* Estimated from similar programs

Career Paths

Occupations commonly associated with precision metal working graduates

Sheet Metal Workers

Fabricate, assemble, install, and repair sheet metal products and equipment, such as ducts, control boxes, drainpipes, and furnace casings. Work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; or inspecting, assembling, and smoothing seams and joints of burred surfaces. Includes sheet metal duct installers who install prefabricated sheet metal ducts used for heating, air conditioning, or other purposes.

$60,850/yrJobs growth:High school diploma or equivalent

Machinists

Set up and operate a variety of machine tools to produce precision parts and instruments out of metal. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures.

$57,700/yrJobs growth:

Tool and Die Makers

Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, jigs, fixtures, gauges, and machinists' hand tools.

$57,700/yrJobs growth:

Welders, Cutters, Solderers, and Brazers

Use hand-welding, flame-cutting, hand-soldering, or brazing equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

$51,000/yrJobs growth:High school diploma or equivalent

Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to extrude or draw thermoplastic or metal materials into tubes, rods, hoses, wire, bars, or structural shapes.

$46,800/yrJobs growth:

Forging Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend forging machines to taper, shape, or form metal or plastic parts.

$46,800/yrJobs growth:

Rolling Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to roll steel or plastic forming bends, beads, knurls, rolls, or plate, or to flatten, temper, or reduce gauge of material.

$46,800/yrJobs growth:

Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material.

$46,800/yrJobs growth:

Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend drilling machines to drill, bore, ream, mill, or countersink metal or plastic work pieces.

$46,800/yrJobs growth:

Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.

$46,800/yrJobs growth:

Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend lathe and turning machines to turn, bore, thread, form, or face metal or plastic materials, such as wire, rod, or bar stock.

$46,800/yrJobs growth:

Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend milling or planing machines to mill, plane, shape, groove, or profile metal or plastic work pieces.

$46,800/yrJobs growth:

About This Data

Source: U.S. Department of Education College Scorecard (October 2025 release)

Population: Graduates who received federal financial aid (Title IV grants or loans). At Southeastern Community College, approximately 27% of students receive Pell grants. Students who did not receive federal aid are not included in these figures.

Earnings: Median earnings from IRS W-2 data for graduates who are employed and not enrolled in further education, measured 1 year after completion. Earnings are pre-tax and include wages, salaries, and self-employment income.

Debt: Median cumulative federal loan debt at graduation. Does not include private loans or Parent PLUS loans borrowed on behalf of students.

Estimated Earnings: Actual earnings data is not available for this program (typically due to privacy thresholds when fewer than 30 graduates reported earnings). The estimate shown is based on the median of 7 similar programs in IA. Actual outcomes may vary.