Location: Texarkana, TX•In-State Tuition: $2,476•Out-of-State Tuition: $5,332
Est. Earnings (1yr)
$35,123
Est. from TX median (5 programs)
Est. Median Debt
$9,168
Est. from TX median (3 programs)

Analysis

Similar Precision Metal Working programs in Texas typically produce first-year earnings around $35,000, which lags the national median of $41,504 by roughly 15%. That gap matters when you're evaluating whether the skilled trades route will deliver the financial returns your child expects. The stronger Texas programs—Austin Community College and Texas State Technical College—report significantly higher outcomes, suggesting location and program quality make a real difference in this field.

The estimated debt of $9,168 is manageable, translating to a debt-to-earnings ratio of 0.26 that falls well within reasonable territory for a two-year technical credential. Comparable programs across Texas carry similar debt loads, and the monthly payments on under $10,000 shouldn't overwhelm an entry-level machinist's budget. Still, the earnings gap between Texarkana's peer-program estimates and the top Texas schools deserves attention—that $10,000 difference in first-year pay compounds over a career.

The key question is whether your child can access better outcomes elsewhere. If Texarkana offers proximity or specific employer connections that matter for your family, the debt load won't sink them. But if they have flexibility in location, programs in Austin or at Texas State Technical College show materially stronger earning potential for essentially the same credential and similar debt.

Where Texarkana College Stands

Earnings vs. debt across all precision metal working associates's programs nationally

Texarkana College (estimated ±10%)Other precision metal working programs

Dashed lines show national medians. Upper-left = best value.

Compare to Similar Programs in Texas

Precision Metal Working associates's programs at peer institutions in Texas (41 total in state)

Scroll to see more →

SchoolIn-State TuitionEarnings (1yr)*Earnings (4yr)Median Debt*Debt/Earnings
Texarkana CollegeTexarkana$2,476$35,123*—$9,168*—
Austin Community College DistrictAustin$2,550$45,279*$48,510$14,122*0.31
Texas State Technical CollegeWaco$7,192$39,234*$49,323$9,168*0.23
Trinity Valley Community CollegeAthens$2,640$35,123*$45,541—*—
South Texas CollegeMcAllen$4,920$33,167*——*—
Vernon CollegeVernon$4,080$32,206*$37,399$5,500*0.17
National Median—$41,504*—$12,000*0.29
* Estimated from similar programs

Career Paths

Occupations commonly associated with precision metal working graduates

Sheet Metal Workers

Fabricate, assemble, install, and repair sheet metal products and equipment, such as ducts, control boxes, drainpipes, and furnace casings. Work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; or inspecting, assembling, and smoothing seams and joints of burred surfaces. Includes sheet metal duct installers who install prefabricated sheet metal ducts used for heating, air conditioning, or other purposes.

$60,850/yrJobs growth:High school diploma or equivalent

Machinists

Set up and operate a variety of machine tools to produce precision parts and instruments out of metal. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures.

$57,700/yrJobs growth:

Tool and Die Makers

Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, jigs, fixtures, gauges, and machinists' hand tools.

$57,700/yrJobs growth:

Welders, Cutters, Solderers, and Brazers

Use hand-welding, flame-cutting, hand-soldering, or brazing equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

$51,000/yrJobs growth:High school diploma or equivalent

Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to extrude or draw thermoplastic or metal materials into tubes, rods, hoses, wire, bars, or structural shapes.

$46,800/yrJobs growth:

Forging Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend forging machines to taper, shape, or form metal or plastic parts.

$46,800/yrJobs growth:

Rolling Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to roll steel or plastic forming bends, beads, knurls, rolls, or plate, or to flatten, temper, or reduce gauge of material.

$46,800/yrJobs growth:

Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material.

$46,800/yrJobs growth:

Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend drilling machines to drill, bore, ream, mill, or countersink metal or plastic work pieces.

$46,800/yrJobs growth:

Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.

$46,800/yrJobs growth:

Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend lathe and turning machines to turn, bore, thread, form, or face metal or plastic materials, such as wire, rod, or bar stock.

$46,800/yrJobs growth:

Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend milling or planing machines to mill, plane, shape, groove, or profile metal or plastic work pieces.

$46,800/yrJobs growth:
About This Data

Source: U.S. Department of Education College Scorecard (October 2025 release)

Population: Graduates who received federal financial aid (Title IV grants or loans). At Texarkana College, approximately 28% of students receive Pell grants. Students who did not receive federal aid are not included in these figures.

Earnings: Median earnings from IRS W-2 data for graduates who are employed and not enrolled in further education, measured 1 year after completion. Earnings are pre-tax and include wages, salaries, and self-employment income.

Debt: Median cumulative federal loan debt at graduation. Does not include private loans or Parent PLUS loans borrowed on behalf of students.

Estimated Earnings: Actual earnings data is not available for this program (typically due to privacy thresholds when fewer than 30 graduates reported earnings). The estimate shown is based on the median of 5 similar programs in TX. Actual outcomes may vary.