Location: Trinidad, CO•In-State Tuition: $4,468•Out-of-State Tuition: $7,100
Est. Earnings (1yr)
$41,504
Est. from national median (56 programs)
Est. Median Debt
$11,562
Est. from national median (20 programs)

Analysis

The estimated debt load of $11,562 puts this program slightly below typical levels for precision metal working associates degrees, which matters when first-year earnings based on peer programs nationally hover around $41,500. That produces a debt-to-earnings ratio of 0.28—manageable by most standards, though Colorado's median for this field runs about $2,200 higher annually. With 41% of Trinidad State students receiving Pell grants, many families here are weighing trade program investments carefully.

The honest challenge is that we're working entirely from national estimates since Trinidad's graduate sample was too small for the Department of Education to report outcomes. Pueblo Community College, the only Colorado school with reported data, shows earnings of $43,715—roughly 5% higher than what similar programs nationally produce. Whether Trinidad's program delivers closer to that Colorado benchmark or falls short remains unknown. Precision metal working typically offers stable demand in Colorado's manufacturing and energy sectors, but location matters significantly for job placement.

The fundamental question is whether an estimated $11,500 investment makes sense when you're relying on peer program data rather than this school's actual track record. If your student is committed to skilled trades and Trinidad's location works for your family, the projected debt burden isn't alarming. But press the school for placement rates and starting wages for recent graduates—you need real outcomes, not estimates, before committing.

Where Trinidad State College Stands

Earnings vs. debt across all precision metal working associates's programs nationally

Trinidad State College (estimated ±10%)Other precision metal working programs

Dashed lines show national medians. Upper-left = best value.

Compare to Similar Programs in Colorado

Precision Metal Working associates's programs at peer institutions in Colorado (10 total in state)

Scroll to see more →

SchoolIn-State TuitionEarnings (1yr)*Earnings (4yr)Median Debt*Debt/Earnings
Trinidad State CollegeTrinidad$4,468$41,504*—$11,562*—
Pueblo Community CollegePueblo$4,883$43,715*$45,494$11,300*0.26
National Median—$41,504*—$12,000*0.29
* Estimated from similar programs

Career Paths

Occupations commonly associated with precision metal working graduates

Sheet Metal Workers

Fabricate, assemble, install, and repair sheet metal products and equipment, such as ducts, control boxes, drainpipes, and furnace casings. Work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; or inspecting, assembling, and smoothing seams and joints of burred surfaces. Includes sheet metal duct installers who install prefabricated sheet metal ducts used for heating, air conditioning, or other purposes.

$60,850/yrJobs growth:High school diploma or equivalent

Machinists

Set up and operate a variety of machine tools to produce precision parts and instruments out of metal. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures.

$57,700/yrJobs growth:

Tool and Die Makers

Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, jigs, fixtures, gauges, and machinists' hand tools.

$57,700/yrJobs growth:

Welders, Cutters, Solderers, and Brazers

Use hand-welding, flame-cutting, hand-soldering, or brazing equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

$51,000/yrJobs growth:High school diploma or equivalent

Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to extrude or draw thermoplastic or metal materials into tubes, rods, hoses, wire, bars, or structural shapes.

$46,800/yrJobs growth:

Forging Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend forging machines to taper, shape, or form metal or plastic parts.

$46,800/yrJobs growth:

Rolling Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to roll steel or plastic forming bends, beads, knurls, rolls, or plate, or to flatten, temper, or reduce gauge of material.

$46,800/yrJobs growth:

Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material.

$46,800/yrJobs growth:

Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend drilling machines to drill, bore, ream, mill, or countersink metal or plastic work pieces.

$46,800/yrJobs growth:

Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.

$46,800/yrJobs growth:

Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend lathe and turning machines to turn, bore, thread, form, or face metal or plastic materials, such as wire, rod, or bar stock.

$46,800/yrJobs growth:

Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend milling or planing machines to mill, plane, shape, groove, or profile metal or plastic work pieces.

$46,800/yrJobs growth:
About This Data

Source: U.S. Department of Education College Scorecard (October 2025 release)

Population: Graduates who received federal financial aid (Title IV grants or loans). At Trinidad State College, approximately 41% of students receive Pell grants. Students who did not receive federal aid are not included in these figures.

Earnings: Median earnings from IRS W-2 data for graduates who are employed and not enrolled in further education, measured 1 year after completion. Earnings are pre-tax and include wages, salaries, and self-employment income.

Debt: Median cumulative federal loan debt at graduation. Does not include private loans or Parent PLUS loans borrowed on behalf of students.

Estimated Earnings: Actual earnings data is not available for this program (typically due to privacy thresholds when fewer than 30 graduates reported earnings). The estimate shown is based on the national median of 56 similar programs. Actual outcomes may vary.