Location: Scottsbluff, NE•In-State Tuition: $3,000•Out-of-State Tuition: $3,360
Est. Earnings (1yr)
$41,504
Est. from national median (56 programs)
Est. Median Debt
$11,562
Est. from national median (20 programs)

Analysis

The manufacturing sector in Nebraska offers strong wage potential, and peer precision metal working programs suggest starting earnings around $41,500—though it's worth noting that the two Nebraska schools with reported outcomes show a wide spread, from $39,400 to $49,100. Western Nebraska Community College's program falls right in the middle of that range based on national comparables, suggesting steady but not standout placement power.

With estimated debt of $11,562, the financial profile looks manageable. That's a debt-to-earnings ratio of 0.28, meaning graduates would owe roughly three months of their first year's salary. Nationally, similar programs carry slightly more debt ($12,000), while Nebraska programs typically produce lower debt loads ($8,575), so Western Nebraska appears competitive on the cost side even if these figures are approximations.

The practical question is whether this program positions students as well as alternatives within driving distance. Southeast Community College's graduates earn considerably more in their first year—nearly $8,000 more than what national data suggests for Western Nebraska—which could justify the commute or relocation for some students. Still, if keeping debt low and staying local matter, a sub-$12,000 debt load for training that leads to $40,000-plus work is defensible, particularly in rural Nebraska where cost of living runs lower than urban areas.

Where Western Nebraska Community College Stands

Earnings vs. debt across all precision metal working associates's programs nationally

Western Nebraska Community College (estimated ±10%)Other precision metal working programs

Dashed lines show national medians. Upper-left = best value.

Compare to Similar Programs in Nebraska

Precision Metal Working associates's programs at peer institutions in Nebraska (5 total in state)

Scroll to see more →

SchoolIn-State TuitionEarnings (1yr)*Earnings (4yr)Median Debt*Debt/Earnings
Western Nebraska Community CollegeScottsbluff$3,000$41,504*—$11,562*—
Southeast Community College AreaLincoln$3,540$49,114*$53,879$11,650*0.24
Central Community CollegeGrand Island$3,360$39,409*$44,476$5,500*0.14
National Median—$41,504*—$12,000*0.29
* Estimated from similar programs

Career Paths

Occupations commonly associated with precision metal working graduates

Sheet Metal Workers

Fabricate, assemble, install, and repair sheet metal products and equipment, such as ducts, control boxes, drainpipes, and furnace casings. Work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; or inspecting, assembling, and smoothing seams and joints of burred surfaces. Includes sheet metal duct installers who install prefabricated sheet metal ducts used for heating, air conditioning, or other purposes.

$60,850/yrJobs growth:High school diploma or equivalent

Machinists

Set up and operate a variety of machine tools to produce precision parts and instruments out of metal. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures.

$57,700/yrJobs growth:

Tool and Die Makers

Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, jigs, fixtures, gauges, and machinists' hand tools.

$57,700/yrJobs growth:

Welders, Cutters, Solderers, and Brazers

Use hand-welding, flame-cutting, hand-soldering, or brazing equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

$51,000/yrJobs growth:High school diploma or equivalent

Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to extrude or draw thermoplastic or metal materials into tubes, rods, hoses, wire, bars, or structural shapes.

$46,800/yrJobs growth:

Forging Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend forging machines to taper, shape, or form metal or plastic parts.

$46,800/yrJobs growth:

Rolling Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to roll steel or plastic forming bends, beads, knurls, rolls, or plate, or to flatten, temper, or reduce gauge of material.

$46,800/yrJobs growth:

Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material.

$46,800/yrJobs growth:

Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend drilling machines to drill, bore, ream, mill, or countersink metal or plastic work pieces.

$46,800/yrJobs growth:

Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.

$46,800/yrJobs growth:

Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend lathe and turning machines to turn, bore, thread, form, or face metal or plastic materials, such as wire, rod, or bar stock.

$46,800/yrJobs growth:

Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend milling or planing machines to mill, plane, shape, groove, or profile metal or plastic work pieces.

$46,800/yrJobs growth:
About This Data

Source: U.S. Department of Education College Scorecard (October 2025 release)

Population: Graduates who received federal financial aid (Title IV grants or loans). At Western Nebraska Community College, approximately 25% of students receive Pell grants. Students who did not receive federal aid are not included in these figures.

Earnings: Median earnings from IRS W-2 data for graduates who are employed and not enrolled in further education, measured 1 year after completion. Earnings are pre-tax and include wages, salaries, and self-employment income.

Debt: Median cumulative federal loan debt at graduation. Does not include private loans or Parent PLUS loans borrowed on behalf of students.

Estimated Earnings: Actual earnings data is not available for this program (typically due to privacy thresholds when fewer than 30 graduates reported earnings). The estimate shown is based on the national median of 56 similar programs. Actual outcomes may vary.